Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for polymer analysis: solvent effect in sample preparation.

The success of matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry for the characterization of polymer structures and for the determination of average molecular weights and distributions depends on the use of a proper sample/matrix preparation protocol. This work examines the effect of solvents, particularly solvent mixtures, used to prepare polymer, matrix, and cationization reagent solutions, on MALDI analysis. It is shown that the use of solvent mixtures consisting of polymer solvent does not have a significant effect on the molecular weight determination of polystyrene 7000 and poly(methyl methacrylate) 3750. However, solvent mixtures containing a polymer nonsolvent can affect the signal reproducibility and cause errors in average weight measurement. This solvent effect was further investigated by using confocal laser fluorescence microscopy in conjunction with the use of a fluorescein-labeled polystyrene. It is demonstrated that sample morphology and polymer distribution on the probe can be greatly influenced by the type of solvents used. For sample preparation in MALDI analysis of polymers, it is important to select a solvent system that will allow matrix crystallization to take place prior to polymer precipitation. The use of an excess amount of any polymer nonsolvent should be avoided.