Literature DB >> 9795084

Comparison of artificial neural networks (ANN) with classical modelling techniques using different experimental designs and data from a galenical study on a solid dosage form.

J Bourquin1, H Schmidli, P van Hoogevest, H Leuenberger.   

Abstract

Artificial Neural Networks (ANN) methodology was used to analyse experimental data from a tabletting study and compared both graphically and numerically to classical modelling techniques (i.e. Response surface methodology, RSM). The aim of this investigation was to describe quantitatively the degree of data fitting achieved and the robustness of the developed models using two types of experimental design (i.e. a statistical, highly organised design and a randomised design). To compare goodness of fit, the R(2) coefficient was used, whereas for the robustness of the models the R(2) coefficient of an independent validation data set was computed. Comparable results were achieved for both ANN and RSM methodology when using the statistical plan. However, the robustness of the models when developed based on a randomised plan was clearly better for the ANN methodology. Based on the results of this study, it appears that the ANN methodology is much less sensitive to the organisational level of a trial design and is therefore better adapted to the data analysis of the results of historical or poorly organised trials. All tablet properties determined were largely influenced by the dwell time during compression as well as by concentration of silica aerogel and magnesium stearate, whereas the other factors showed very much weaker effects.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9795084     DOI: 10.1016/s0928-0987(97)10025-2

Source DB:  PubMed          Journal:  Eur J Pharm Sci        ISSN: 0928-0987            Impact factor:   4.384


  6 in total

1.  Factors affecting the stability of nanoemulsions--use of artificial neural networks.

Authors:  Amir Amani; Peter York; Henry Chrystyn; Brian J Clark
Journal:  Pharm Res       Date:  2009-11-12       Impact factor: 4.200

2.  Quality by design approach: application of artificial intelligence techniques of tablets manufactured by direct compression.

Authors:  Buket Aksu; Anant Paradkar; Marcel de Matas; Ozgen Ozer; Tamer Güneri; Peter York
Journal:  AAPS PharmSciTech       Date:  2012-09-06       Impact factor: 3.246

3.  Investigating the parameters affecting the stability of superparamagnetic iron oxide-loaded nanoemulsion using artificial neural networks.

Authors:  Gholamreza Ahmadi Lakalayeh; Reza Faridi-Majidi; Reza Saber; Alireza Partoazar; Shahram Ejtemaei Mehr; Amir Amani
Journal:  AAPS PharmSciTech       Date:  2012-10-09       Impact factor: 3.246

Review 4.  Application of Artificial Neural Networks in the Process Analytical Technology of Pharmaceutical Manufacturing-a Review.

Authors:  Brigitta Nagy; Dorián László Galata; Attila Farkas; Zsombor Kristóf Nagy
Journal:  AAPS J       Date:  2022-06-14       Impact factor: 3.603

5.  Optimization of Salbutamol Sulfate Dissolution from Sustained Release Matrix Formulations Using an Artificial Neural Network.

Authors:  Faith Chaibva; Michael Burton; Roderick B Walker
Journal:  Pharmaceutics       Date:  2010-05-06       Impact factor: 6.321

6.  Computational intelligence models to predict porosity of tablets using minimum features.

Authors:  Mohammad Hassan Khalid; Pezhman Kazemi; Lucia Perez-Gandarillas; Abderrahim Michrafy; Jakub Szlęk; Renata Jachowicz; Aleksander Mendyk
Journal:  Drug Des Devel Ther       Date:  2017-01-12       Impact factor: 4.162

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.