Literature DB >> 9704913

Ultrasound-induced degradation of PLA and PLGA during microsphere processing: influence of formulation variables.

G Reich1.   

Abstract

The effect of probe sonication during microsphere processing on the stability of various aliphatic polyesters based on lactic acid (PLA) and lactic/glycolic acid (PLGA) was investigated. The weight average molecular weight (Mw) of the polymers dissolved in dichloromethane (DCM) generally decreased with an increase in duration and/or intensity of the sonication process. The extent of the Mw-reduction was more pronounced with polymers of high initial Mw and high GA content. Polydispersity indices (PD=Mw/Mn) were nearly unchanged indicating that random chain cleavage is the likely degradation mechanism. From the observation that ultrasound-induced polymer degradation slightly increased in the presence of suspended drug particles acting as cavitation nuclei, it can be concluded that the mechanical stress induced by the implosive collapse of cavitation bubbles is at least partly responsible for the observed effects in PLA/ PLGA solutions. The use of ultrasound for the preparation of W/O, O/W and W/O/W emulsions exhibited different effects depending on the formulation and the type of emulsion. The preparation of W/O emulsions generally lead to Mw-changes comparable to those observed for the corresponding polymer solutions. Fatty acid free bovine serum albumin (BSAff) was found to protect PLA and PLGA against ultrasound-induced degradation in W/O-emulsions due to the formation of a semisolid interfacial film. A tremendous effect not only on the polymer Mw, but also on its PD could be observed, when ultrasound was used to emulsify an organic polymer solution or W/O-emulsion in an external aqueous phase. As this last finding was found to have rather important implications on the drug loading efficiency, the hydration, the degradation and the initial release characteristics of the resulting microspheres, it can be concluded that probe sonication can be a rather critical process step during the preparation of microspheres.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9704913     DOI: 10.1016/s0939-6411(97)00152-5

Source DB:  PubMed          Journal:  Eur J Pharm Biopharm        ISSN: 0939-6411            Impact factor:   5.571


  10 in total

Review 1.  Points to consider when establishing drug product specifications for parenteral microspheres.

Authors:  Rajesh Kumar; Michael J Palmieri
Journal:  AAPS J       Date:  2009-11-17       Impact factor: 4.009

2.  Focused Ultrasound as a Scalable and Contact-Free Method to Manufacture Protein-Loaded PLGA Nanoparticles.

Authors:  Stefan Schiller; Andrea Hanefeld; Marc Schneider; Claus-Michael Lehr
Journal:  Pharm Res       Date:  2015-03-31       Impact factor: 4.200

3.  Particle size influences the immune response produced by hepatitis B vaccine formulated in inhalable particles.

Authors:  Chandan Thomas; Vivek Gupta; Fakhrul Ahsan
Journal:  Pharm Res       Date:  2010-03-16       Impact factor: 4.200

4.  Effect of polymer blending on the release of ganciclovir from PLGA microspheres.

Authors:  Sridhar Duvvuri; Kumar Gaurav Janoria; Ashim K Mitra
Journal:  Pharm Res       Date:  2006-12-06       Impact factor: 4.200

5.  Robust Chemical Strategy for Stably Labeling Polyester-Based Nanoparticles with BODIPY Fluorophores.

Authors:  Ivan S Alferiev; Ilia Fishbein; Robert J Levy; Michael Chorny
Journal:  ACS Appl Polym Mater       Date:  2022-01-06

6.  Functionalized poly(lactic-co-glycolic acid) enhances drug delivery and provides chemical moieties for surface engineering while preserving biocompatibility.

Authors:  James P Bertram; Steven M Jay; Sara R Hynes; Rebecca Robinson; Jason M Criscione; Erin B Lavik
Journal:  Acta Biomater       Date:  2009-05-04       Impact factor: 8.947

7.  Clinically viable magnetic poly(lactide-co-glycolide) particles for MRI-based cell tracking.

Authors:  Dorit Granot; Michael K Nkansah; Margaret F Bennewitz; Kevin S Tang; Eleni A Markakis; Erik M Shapiro
Journal:  Magn Reson Med       Date:  2014-03       Impact factor: 4.668

8.  Time-lapsed imaging of nanocomposite scaffolds reveals increased bone formation in dynamic compression bioreactors.

Authors:  Gian Nutal Schädli; Jolanda R Vetsch; Robert P Baumann; Anke M de Leeuw; Esther Wehrle; Marina Rubert; Ralph Müller
Journal:  Commun Biol       Date:  2021-01-25

9.  Industrial Scale Manufacturing and Downstream Processing of PLGA-Based Nanomedicines Suitable for Fully Continuous Operation.

Authors:  Maria Camilla Operti; Alexander Bernhardt; Vladimir Sincari; Eliezer Jager; Silko Grimm; Andrea Engel; Martin Hruby; Carl Gustav Figdor; Oya Tagit
Journal:  Pharmaceutics       Date:  2022-01-25       Impact factor: 6.321

Review 10.  Poly(lactic-co-glycolic acid) microsphere production based on quality by design: a review.

Authors:  Yabing Hua; Yuhuai Su; Hui Zhang; Nan Liu; Zengming Wang; Xiang Gao; Jing Gao; Aiping Zheng
Journal:  Drug Deliv       Date:  2021-12       Impact factor: 6.819

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.