Literature DB >> 9690836

Poly(anhydride-co-imides): in vivo biocompatibility in a rat model.

S M Ibim1, K E Uhrich, R Bronson, S F El-Amin, R S Langer, C T Laurencin.   

Abstract

The degradation and tissue compatibility characteristics of a novel class of biodegradable poly(anhydride-co-imide) polymers: poly[trimellitylimidoglycine-co-1,6-bis(carboxyphenoxy)hexan e] (TMA-gly: CPH) (in 10:90; 30:70 and 50: 50 molar ratios) and poly[pyromellitylimidoalanine-co-1,6-bis(carboxyphenoxy)hexa ne] (PMA-ala:CPH) (in 10:90 and 30:70 molar ratios) were investigated and compared with control poly(lactic acid/glycolic acid) (PLAGA in 50:50 molar ratio) matrices, a well-characterized biocompatible polymer, in rat subcutaneous tissues for 60 days. Polymers were compression-molded into circular discs of 14 mm x 1 mm in diameter. On post-operative days 7, 14, 28 and 60, histological tissue samples were removed, prepared by fixation and staining, and analyzed by light microscopy. PLAGA matrices produced mild inflammatory reactions and were completely degraded at the end of 60 days, leaving implant tissues that were similar to surgical wounds without implants. TMA-gly:CPH (10:90 and 30:70) matrices produced mild inflammatory reactions by the end of 60 days, similar to those seen with PLAGA. TMA-gly: CPH (50: 50) produced moderate inflammatory reactions characterized by macrophages and edema. PMA-ala:CPH matrices elicited minimal inflammatory reactions that were characterized by fibrous encapsulation by the end of 60 days. In vivo degradation rates of poly(anhydride-co-imides) were similar to PLAGA. Both PMA-ala:CPH and TMA-gly: CPH matrices maintained their shapes and degraded at a constant rate over the period of two months. These polymers, possessing good mechanical properties and tissue compatibility, may be useful in weight-bearing applications in bone.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9690836     DOI: 10.1016/s0142-9612(98)00019-2

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  12 in total

1.  Biocompatibility of polysebacic anhydride microparticles with chondrocytes in engineered cartilage.

Authors:  Sathish Ponnurangam; Grace D O'Connell; Clark T Hung; Ponisseril Somasundaran
Journal:  Colloids Surf B Biointerfaces       Date:  2015-08-28       Impact factor: 5.268

Review 2.  Biomaterial strategies for engineering implants for enhanced osseointegration and bone repair.

Authors:  Rachit Agarwal; Andrés J García
Journal:  Adv Drug Deliv Rev       Date:  2015-04-08       Impact factor: 15.470

3.  Dipeptide-based polyphosphazene and polyester blends for bone tissue engineering.

Authors:  Meng Deng; Lakshmi S Nair; Syam P Nukavarapu; Tao Jiang; William A Kanner; Xudong Li; Sangamesh G Kumbar; Arlin L Weikel; Nicholas R Krogman; Harry R Allcock; Cato T Laurencin
Journal:  Biomaterials       Date:  2010-03-23       Impact factor: 12.479

4.  The Role of Nanomaterials and Biological Agents on Rotator Cuff Regeneration.

Authors:  Kenyatta S Washington; Nikoo Saveh Shemshaki; Cato T Laurencin
Journal:  Regen Eng Transl Med       Date:  2020-09-23

5.  Injectable cellulose-based hydrogels as nucleus pulposus replacements: Assessment of in vitro structural stability, ex vivo herniation risk, and in vivo biocompatibility.

Authors:  Huizi Anna Lin; Devika M Varma; Warren W Hom; Michelle A Cruz; Philip R Nasser; Robert G Phelps; James C Iatridis; Steven B Nicoll
Journal:  J Mech Behav Biomed Mater       Date:  2019-04-17

6.  Biodegradation and in vivo biocompatibility of rosin: a natural film-forming polymer.

Authors:  Prashant M Satturwar; Suniket V Fulzele; Avinash K Dorle
Journal:  AAPS PharmSciTech       Date:  2003-10-22       Impact factor: 3.246

7.  Biocompatibility of single-walled carbon nanotube composites for bone regeneration.

Authors:  A Gupta; T A Liberati; S J Verhulst; B J Main; M H Roberts; A G R Potty; T K Pylawka; S F El-Amin Iii
Journal:  Bone Joint Res       Date:  2015-05       Impact factor: 5.853

8.  Synchrotron-Based in Situ Characterization of the Scaffold Mass Loss from Erosion Degradation.

Authors:  Nahshon K Bawolin; Xiongbaio Chen
Journal:  J Funct Biomater       Date:  2016-07-05

9.  In vivo biocompatibility of PLGA-polyhexylthiophene nanofiber scaffolds in a rat model.

Authors:  Anuradha Subramanian; Uma Maheswari Krishnan; Swaminathan Sethuraman
Journal:  Biomed Res Int       Date:  2013-07-23       Impact factor: 3.411

10.  Evaluation of in vitro and in vivo biocompatibility of a myo-inositol hexakisphosphate gelated polyaniline hydrogel in a rat model.

Authors:  Kwang-Hsiao Sun; Zhao Liu; Changjian Liu; Tong Yu; Tao Shang; Chen Huang; Min Zhou; Cheng Liu; Feng Ran; Yun Li; Yi Shi; Lijia Pan
Journal:  Sci Rep       Date:  2016-04-13       Impact factor: 4.379

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.