J Adam1. 1. Sunscreed Product Education program, Canadian Dermatology Association, University of Owwawa, Ontario, Canada.
Abstract
BACKGROUND: Topical sunscreens have been used for many years on exposed areas (i.e., hands, face) to protect the skin from the damaging effects of ultraviolet radiation. Most people do not use sunscreens on their bodies when they are wearing clothes. An average weight cotton T shirt gives only a sun protection factor (SPF) of 7. This is inadequate protection when out of doors. Therefore, clothing with adequate sunscreening properties should be worn. OBJECTIVE: The purpose of this study is to identify the factors in clothing fabrics that contribute to or detract from blocking ultraviolet radiation and to recommend criteria for establishing a standard for sunprotective clothing. METHOD: The study involves a review of the dermatologic and textile literature to identify various factors in fabrics that contribute to blocking ultraviolet radiation through textiles. CONCLUSION: For fabrics, the term ultraviolet protection factor (UPF) is used as the measure of ultraviolet radiation penetration through the fabric. The UPF of a fabric depends upon fiber content and weave, fabric colour, finishing processes, and the presence of additives. The performance of a fabric depends upon stretching, shrinkage, hydration, laundering, and wear of the fabric over time. Based upon these criteria the minimum CDA standard UPF for clothing should be 40 to 50+.
BACKGROUND: Topical sunscreens have been used for many years on exposed areas (i.e., hands, face) to protect the skin from the damaging effects of ultraviolet radiation. Most people do not use sunscreens on their bodies when they are wearing clothes. An average weight cotton T shirt gives only a sun protection factor (SPF) of 7. This is inadequate protection when out of doors. Therefore, clothing with adequate sunscreening properties should be worn. OBJECTIVE: The purpose of this study is to identify the factors in clothing fabrics that contribute to or detract from blocking ultraviolet radiation and to recommend criteria for establishing a standard for sunprotective clothing. METHOD: The study involves a review of the dermatologic and textile literature to identify various factors in fabrics that contribute to blocking ultraviolet radiation through textiles. CONCLUSION: For fabrics, the term ultraviolet protection factor (UPF) is used as the measure of ultraviolet radiation penetration through the fabric. The UPF of a fabric depends upon fiber content and weave, fabric colour, finishing processes, and the presence of additives. The performance of a fabric depends upon stretching, shrinkage, hydration, laundering, and wear of the fabric over time. Based upon these criteria the minimum CDA standard UPF for clothing should be 40 to 50+.
Authors: Sérgio Schalka; Denise Steiner; Flávia Naranjo Ravelli; Tatiana Steiner; Aripuanã Cobério Terena; Carolina Reato Marçon; Eloisa Leis Ayres; Flávia Alvim Sant'anna Addor; Helio Amante Miot; Humberto Ponzio; Ida Duarte; Jane Neffá; José Antônio Jabur da Cunha; Juliana Catucci Boza; Luciana de Paula Samorano; Marcelo de Paula Corrêa; Marcus Maia; Nilton Nasser; Olga Maria Rodrigues Ribeiro Leite; Otávio Sergio Lopes; Pedro Dantas Oliveira; Renata Leal Bregunci Meyer; Tânia Cestari; Vitor Manoel Silva dos Reis; Vitória Regina Pedreira de Almeida Rego Journal: An Bras Dermatol Date: 2014 Nov-Dec Impact factor: 1.896
Authors: Luca Di Bartolomeo; Natasha Irrera; Giuseppe Maurizio Campo; Francesco Borgia; Alfonso Motolese; Federico Vaccaro; Francesco Squadrito; Domenica Altavilla; Alessandra Grazia Condorelli; Alberico Motolese; Mario Vaccaro Journal: Front Allergy Date: 2022-06-20