Literature DB >> 9641122

Analysis of forces developed during obturations. Wedging effect: Part II.

J Y Blum1, P Machtou, J P Micallef.   

Abstract

The aim of this study was to use a force analyzer device, the modified Endographe with a new cupule, to compare the forces and wedging effects developed in the root canal using four obturation techniques: warm vertical compaction, lateral condensation, thermomechanical compaction, and Thermafil condensation. The different methods--that varied in instrumentation, duration, and compaction load--were studied from graphs representing the force application sequences. In addition, the graphs resulting from modifications in technique (such as using an undersized spreader and pluggers that were either too small or too big) and deliberately induced failures in technique (by use of a too small condenser or a too small master cone) were studied. The mean values for the wedging effect for warm vertical compaction, lateral condensation, thermomechanical compaction, and Thermafil condensation were, respectively, 0.65 +/- 0.07 kg, 0.8 +/- 0.1 kg, 0.6 +/- 0.08 kg, and 0.03 +/- 0.01 kg. The use of graphs provides a new approach to the analysis of obturation techniques.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9641122     DOI: 10.1016/S0099-2399(98)80100-3

Source DB:  PubMed          Journal:  J Endod        ISSN: 0099-2399            Impact factor:   4.171


  12 in total

1.  A simplified post preparation technique after Thermafil obturation: evaluation of apical microleakage and presence of voids using methylene blue dye penetration.

Authors:  Luca Pusinanti; Riccardo Rubini; Agnese Pellati; Nicoletta Zerman
Journal:  Ann Stomatol (Roma)       Date:  2013-06-25

2.  Incidence of post-obturation pain after single-visit versus multiple-visit non-surgical endodontic treatments.

Authors:  Amy Wai-Yee Wong; Shinan Zhang; Samantha Kar-Yan Li; Xiaofei Zhu; Chengfei Zhang; Chun-Hung Chu
Journal:  BMC Oral Health       Date:  2015-08-14       Impact factor: 2.757

3.  Device and materials for in vitro evaluation of forces developed to teeth and periodontal structures during dental practices.

Authors:  Fotios D Palamidakis; Athanasia Panou; Kyriaki G Papadokostaki; George Leontakianakos; Vassilis N Stathopoulos; Evangelos G Kontakiotis
Journal:  J Dent Biomech       Date:  2013-09-04

4.  Mechanical or cold lateral compaction: The incidence of dentinal defects.

Authors:  Seyed Mohsen Hasheminia; Ali Reza Farhad; Masoud Saatchi; Hamidreza Sadegh Nejad; Maryam Sanei
Journal:  Dent Res J (Isfahan)       Date:  2015 Nov-Dec

5.  Fracture resistance of roots enlarged with various rotary systems and obturated with different sealers.

Authors:  Selen İnce Yusufoglu; Melek Akman; Makbule Bilge Akbulut; Ayce Ünverdi Eldeniz
Journal:  J Dent Res Dent Clin Dent Prospects       Date:  2019-10-07

6.  Vertical root fracture resistance and dentinal crack formation of root canal-treated teeth instrumented with different nickel-titanium rotary systems: an in-vitro study.

Authors:  Galvin Sim Siang Lin; Kiran Prabhakar Singbal; Tahir Yusuf Noorani; Raghavendra Penukonda
Journal:  Odontology       Date:  2021-07-16       Impact factor: 2.634

7.  Sealing ability of lateral compaction and tapered single cone gutta-percha techniques in root canals prepared with stainless steel and rotary nickel titanium instruments.

Authors:  Mustafa M Koçak; Sis Darendeliler-Yaman
Journal:  J Clin Exp Dent       Date:  2012-07-01

8.  Dentinal defects before and after rotary root canal instrumentation with three different obturation techniques and two obturating materials.

Authors:  Ponnuswamy Kumaran; Elangovan Sivapriya; Jamuna Indhramohan; Velayutham Gopikrishna; K Subramani Savadamoorthi; Angambakkam Rajasekharan Pradeepkumar
Journal:  J Conserv Dent       Date:  2013-11

9.  Effect of root canal preparation, obturation, and retreatment on the induction of dentinal microcracks: A microcomputed tomography study.

Authors:  Apoorva Jain; Vineeta Nikhil; Parul Bansal
Journal:  J Conserv Dent       Date:  2018 Sep-Oct

10.  Comparison of continuous wave and cold lateral condensation filling techniques in 3D printed simulated C-shape canals instrumented with Reciproc Blue or Hyflex EDM.

Authors:  Anıl Özgün Karatekin; Ali Keleş; Nimet Gençoğlu
Journal:  PLoS One       Date:  2019-11-21       Impact factor: 3.240

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.