Literature DB >> 9638538

Engineering smooth muscle tissue with a predefined structure.

B S Kim1, D J Mooney.   

Abstract

Nonwoven meshes of polyglycolic acid (PGA) fibers are attractive synthetic extracellular matrices (ECMs) for tissue engineering and have been used to engineer many types of tissues. However, these synthetic ECMs lack structural stability and often cannot maintain their original structure during tissue development. This makes it difficult to design an engineered tissue with a predefined configuration and dimensions. In this study, we investigated the ability of PGA fiber-based matrices bonded at their fiber crosspoints with a secondary polymer, poly-L-lactic acid (PLLA), to resist cellular contractile forces and maintain their predefined structure during the process of smooth muscle (SM) tissue development in vitro. Physically bonded PGA matrices exhibited a 10- to 35-fold increase in the compressive modulus over unbonded PGA matrices, depending on the mass of PLLA utilized to bond the PGA matrices. In addition, the bonded PGA matrices degraded much more slowly than the unbonded matrices. The PLLA bonding of PGA matrices had no effect on the ability of cells to adhere to the matrices. After 7 weeks in culture, the bonded matrices maintained 101 +/- 4% of their initial volume and an approximate original shape while the unbonded matrices contracted to 5 +/- 1% of their initial volume with an extreme change in their shape. At this time the bonded PGA matrices had a high cellularity, with smooth muscle cells (SMCs) and ECM proteins produced by these cells (e.g., elastin) filling the pores between PGA fibers. This study demonstrated that physically bonded PGA fiber-based matrices allow the maintenance of the configuration and dimensions of the original matrices and the development of a new tissue in a predefined three-dimensional structure. This approach may be useful for engineering a variety of tissues of various structures and shapes, and our study demonstrates the importance of matching both the initial mechanical properties and the degradation rate of a matrix to the specific tissue one is engineering.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9638538     DOI: 10.1002/(sici)1097-4636(199808)41:2<322::aid-jbm18>3.0.co;2-m

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  18 in total

1.  Fibrin degradation enhances vascular smooth muscle cell proliferation and matrix deposition in fibrin-based tissue constructs fabricated in vitro.

Authors:  Katherine A Ahmann; Justin S Weinbaum; Sandra L Johnson; Robert T Tranquillo
Journal:  Tissue Eng Part A       Date:  2010-10       Impact factor: 3.845

Review 2.  Tissue engineering and regenerative strategies to replicate biocomplexity of vascular elastic matrix assembly.

Authors:  Chris A Bashur; Lavanya Venkataraman; Anand Ramamurthi
Journal:  Tissue Eng Part B Rev       Date:  2012-03-02       Impact factor: 6.389

Review 3.  Getting to the heart of tissue engineering.

Authors:  Luda Khait; Louise Hecker; Nicole R Blan; Garrett Coyan; Francesco Migneco; Yen-Chih Huang; Ravi K Birla
Journal:  J Cardiovasc Transl Res       Date:  2008-01-29       Impact factor: 4.132

4.  Local Heterogeneities Improve Matrix Connectivity in Degradable and Photoclickable Poly(ethylene glycol) Hydrogels for Applications in Tissue Engineering.

Authors:  Margaret C Schneider; Stanley Chu; Shankar Lalitha Sridhar; Gaspard de Roucy; Franck J Vernerey; Stephanie J Bryant
Journal:  ACS Biomater Sci Eng       Date:  2017-07-10

5.  Impact of cyclic stretch on induced elastogenesis within collagenous conduits.

Authors:  Lavanya Venkataraman; Chris A Bashur; Anand Ramamurthi
Journal:  Tissue Eng Part A       Date:  2014-02-07       Impact factor: 3.845

6.  Initial fiber alignment pattern alters extracellular matrix synthesis in fibroblast-populated fibrin gel cruciforms and correlates with predicted tension.

Authors:  E A Sander; V H Barocas; R T Tranquillo
Journal:  Ann Biomed Eng       Date:  2010-10-29       Impact factor: 3.934

7.  A mathematical model for the determination of forming tissue moduli in needled-nonwoven scaffolds.

Authors:  João S Soares; Will Zhang; Michael S Sacks
Journal:  Acta Biomater       Date:  2017-01-05       Impact factor: 8.947

8.  Mimicking isovolumic contraction with combined electromechanical stimulation improves the development of engineered cardiac constructs.

Authors:  Kathy Ye Morgan; Lauren Deems Black
Journal:  Tissue Eng Part A       Date:  2014-04-07       Impact factor: 3.845

Review 9.  Biomaterials for vascular tissue engineering.

Authors:  Swathi Ravi; Elliot L Chaikof
Journal:  Regen Med       Date:  2010-01       Impact factor: 3.806

10.  Effects of in vitro degradation on properties of poly(DL-lactide-co-glycolide) pertinent to its biological performance.

Authors:  Meng Deng; Kathryn E Uhrich
Journal:  J Mater Sci Mater Med       Date:  2002-11       Impact factor: 3.896

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.