Literature DB >> 9588991

Effect of water sorption on the resistance to plastic deformation of a denture base material relined with four different denture reline materials.

Y Takahashi1, J Chai, M Kawaguchi.   

Abstract

PURPOSE: The effect of water sorption on the flexural strength at the proportional limit (FSp) of a denture base material relined with four different denture reline materials was studied.
MATERIALS AND METHODS: Denture base specimens were relined either after 24 hours or 30 days of water immersion. The relined specimens were tested after another period of 24 hours or 30 days of water immersion.
RESULTS: Relined denture specimens generally exhibited lower FSp with an increase in water immersion time and an increase in the thickness of the reline material.
CONCLUSIONS: The plasticizing effect of absorbed water molecules explains the general decrease in FSp of immersed relined specimens. The absence of a significant effect that water immersion had on some relined specimens under certain immersion conditions was explained by water sorption into the denture base achieving an equilibrium after a period of water immersion, and the resistance of some reline materials to the effect of water immersion.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9588991

Source DB:  PubMed          Journal:  Int J Prosthodont        ISSN: 0893-2174            Impact factor:   1.681


  11 in total

Review 1.  The Effect of Microwave Disinfection on Denture Base Polymers, Liners and Teeth: A Basic Overview.

Authors:  Theodoros Klironomos; Aspasia Katsimpali; Gregory Polyzois
Journal:  Acta Stomatol Croat       Date:  2015-09

2.  Effect of Disinfectants on Mechanical Properties of Orthodontic Acrylics.

Authors:  Tobias Bensel; Jens J Bock; Anne Kebernik; Christin Arnold; Sonia Mansour; Arne F Boeckler
Journal:  Int J Biomater       Date:  2019-04-24

3.  Influence of artificial aging and ZrO2 nanoparticle-reinforced repair resin on the denture repair strength.

Authors:  Mohammed M Gad; Ahmed Rahoma; Reem Abualsaud; Ahmad M Al-Thobity; Sultan Akhtar; Intisar A Siddiqui; Fahad A Al-Harbi
Journal:  J Clin Exp Dent       Date:  2020-04-01

4.  The evaluation of water sorption/solubility on various acrylic resins.

Authors:  Suleyman Hakan Tuna; Filiz Keyf; Hasan Onder Gumus; Cengiz Uzun
Journal:  Eur J Dent       Date:  2008-07

5.  Reinforcing effect of glass fiber-reinforced composite reinforcement on flexural strength at proportional limit of a repaired denture base resin.

Authors:  Kaneyoshi Yoshida; Yutaka Takahashi; Ippei Hamanaka; Tomohiro Kawaguchi; Hirono Sasaki; Hiroshi Shimizu
Journal:  Acta Biomater Odontol Scand       Date:  2015-10-12

6.  Flexural strengths of reinforced denture base resins subjected to long-term water immersion.

Authors:  Kaneyoshi Yoshida; Yutaka Takahashi; Hirono Sasaki; Ippei Hamanaka; Tomohiro Kawaguchi
Journal:  Acta Biomater Odontol Scand       Date:  2016-01-26

7.  Comparison of the Water Sorption and Solubility of Four Reline Acrylic Resins after Immersion in Food-Simulating Agents.

Authors:  Mitra Zirak; Mahroo Vojdani; Sorour Mohammadi; Amir-Alireza Khaledi
Journal:  J Int Soc Prev Community Dent       Date:  2019-02-14

8.  Comparison of Mechanical Properties of PMMA Disks for Digitally Designed Dentures.

Authors:  Tamaki Hada; Manabu Kanazawa; Maiko Iwaki; Awutsadaporn Katheng; Shunsuke Minakuchi
Journal:  Polymers (Basel)       Date:  2021-05-26       Impact factor: 4.329

9.  Bond strength of hard chairside reline resins to a rapid polymerizing denture base resin before and after thermal cycling.

Authors:  Karin Hermana Neppelenbroek; Ana Cláudia Pavarina; Mauricio Neves Gomes; Ana Lucia Machado; Carlos Eduardo Vergani
Journal:  J Appl Oral Sci       Date:  2006-12       Impact factor: 2.698

10.  Water Sorption, Solubility, and Translucency of 3D-Printed Denture Base Resins.

Authors:  Mohammed M Gad; Saleh Z Alshehri; Shahad A Alhamid; Alanoud Albarrak; Soban Q Khan; Faris A Alshahrani; Firas K Alqarawi
Journal:  Dent J (Basel)       Date:  2022-03-09
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.