Hamstring and patellar tendon graft response to cyclical loading.

This study evaluates the effect of submaximal cyclical loads on the tendinous portion of the central 10 mm of the patellar tendon compared with doubled semitendinosus and gracilis tendons. Six fresh-frozen cadaveric knee specimens were used for the study. There was no significant difference between the cross-sectional areas of a 10-mm patellar tendon and four strands of hamstring tendon (looped semitendinosus and gracilis) from the same specimen. The mean cross-sectional area was 44.4 mm2 for the patellar tendon and 47.5 mm2 for the four strands of hamstring. The specimens were cyclically loaded for 1000 cycles from 0 to 300 N at a rate of 1 Hz; the materials testing machine was set on load control. There were no significant differences in the strain, stress, or modulus between the 10-mm patellar tendon and four strands of hamstring tendon after 1000 cycles of loading to 300 N. These data substantiate the excellent clinical results obtained with either graft source and support the use of either graft source for ACL reconstruction.