Literature DB >> 9484070

The effects of polymerization temperature on the acrylic resin denture base-tooth bond.

S Büyükyilmaz1, I E Ruyter.   

Abstract

The effect of different polymerization temperatures on the bond strength and the type of bond failure between denture base polymers and polymer teeth were investigated using two autopolymerized and one heat-polymerized denture base material. For this purpose, a peel test and a shear test were used. The strongest bond strengths occurred between the heat-polymerized denture base polymer and the polymer teeth. Autopolymerized denture base polymers showed lower bond strengths. With increasing temperatures, the bond strength of the autopolymerized systems increased and the bonding characteristics changed from adhesive to cohesive failure, particularly at temperatures above 50 degrees C.

Entities:  

Mesh：

Substances：

Year:  1997        PMID： 9484070

Source DB:  PubMed          Journal:  Int J Prosthodont        ISSN： 0893-2174            Impact factor:   1.681


  9 in total

1.  Bond of acrylic teeth to different denture base resins after various surface-conditioning methods.

Authors:  Reinhold Lang; Carola Kolbeck; Rainer Bergmann; Gerhard Handel; Martin Rosentritt
Journal:  Clin Oral Investig       Date:  2010-12-22       Impact factor: 3.573

2.  Influence of Surface Modifications of Acrylic Resin Teeth on Shear Bond Strength with Denture Base Resin-An Invitro Study.

Authors:  Vallabh Mahadevan; Madhusudan Krishnan; Chitra Shankar Krishnan; N S Azhagarasan; Jayakrishnakumar Sampathkumar; Hariharan Ramasubramanian
Journal:  J Clin Diagn Res       Date:  2015-09-01

3.  The semi-interpenetrating polymer network matrix of fiber-reinforced composite and its effect on the surface adhesive properties.

Authors:  T M Lastumäki; L V J Lassila; P K Vallittu
Journal:  J Mater Sci Mater Med       Date:  2003-09       Impact factor: 3.896

4.  Tensile bond strength of four denture resins to porcelain teeth with different surface treatment.

Authors:  Mohamed El-Sheikh; John Powers
Journal:  J Adv Prosthodont       Date:  2013-11-28       Impact factor: 1.904

5.  Effect of surface treatments on shear bond strength of denture teeth to denture base resins.

Authors:  Farideh Bahrani; Amir Ali Reza Khaledi
Journal:  Dent Res J (Isfahan)       Date:  2014-01

6.  A comparison of shear bond strength of ceramic and resin denture teeth on different acrylic resin bases.

Authors:  Massimo Corsalini; Daniela Di Venere; Francesco Pettini; Gianluca Stefanachi; Santo Catapano; Antonio Boccaccio; Luciano Lamberti; Carmine Pappalettere; Stefano Carossa
Journal:  Open Dent J       Date:  2014-12-29

7.  Comparison of Bond Strength of Acrylic, Composite, and Nanocomposite Artificial Teeth to Heat-Cure Acrylic Denture Base Resin.

Authors:  Tahereh Ghaffari Gharebagh; Fahimeh Hamedirad; Keyvan Miruzadeh
Journal:  Front Dent       Date:  2019-06-29

8.  Comparison of shear bond strengths of different types of denture teeth to different denture base resins.

Authors:  Vladimir Prpić; Zdravko Schauperl; Domagoj Glavina; Amir Ćatić; Samir Čimić
Journal:  J Adv Prosthodont       Date:  2020-12-28       Impact factor: 1.904

9.  Bond Strength of Acrylic Denture Tooth to a Novel Thermo-Polymerized Denture Base Copolymer Containing Cycloaliphatic Comonomer after Mechanical and Thermal Aging.

Authors:  Ranganathan Ajay; Kanagesan Praveena; Krishnan Rajkumar; Ranganathan Krishnaraj; Selvakumar Preethisuganya; Karthigeyan Suma
Journal:  J Pharm Bioallied Sci       Date:  2021-11-10
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.