Literature DB >> 9477790

Shaping ability of the M4 handpiece and Safety Hedstrom files in simulated root canals.

A Lloyd1, A Jaunberzins, A Dhopatkar, S Bryant, P M Dummer.   

Abstract

The aim of this study was to assess the shaping ability of the M4 reciprocating handpiece and Safety Hedstrom files in simulated canals. A total of 40 simulated canals of various angles and positions of curvature were prepared with an M4 handpiece using Safety Hedstrom files oriented with the ground, flattened surface towards the inner aspect of the curve. A standard regimen was adopted throughout. Pre- and post-operative longitudinal images of the canals were taken with a video camera and stored and manipulated in a computer with image analysis software. The presence of canal aberrations and the amount and location of resin material removed as a result of preparation were determined from composite images of superimposed pre- and post-operative views. Preparation time varied significantly (P < 0.001) between the canal types; overall, 20 degrees canals were prepared more quickly than 40 degrees canals. Zips and elbows were observed in 16 out of the 40 canals with most (11) being created in 40 degrees specimens. Ledges were found in 19 canals and perforations in only 1. There were no significant differences between canal shapes for these aberrations. Excessive removal of material from the inner aspect of the canal at the curve to create a danger zone was found in 20 canals, but only in those with 40 degrees curves. Significant differences in total canal width between the canal types were seen at the zips (P < 0.05), elbows (P < 0.05) and danger zones (P < 0.001). Transportation at the danger zones varied significantly (P < 0.001) between canal types. Under the conditions of this study, the M4 handpiece and Safety Hedstrom files created hour-glass preparations in a substantial proportion of canals. In reality, the Safety Hedstrom file with its one flattened surface was ineffective at reducing removal of material along the inner aspect of canal curves in severely curved specimens and clearly has the potential to create strip perforations in teeth.

Mesh:

Substances:

Year:  1997        PMID: 9477790     DOI: 10.1111/j.1365-2591.1997.tb01094.x

Source DB:  PubMed          Journal:  Int Endod J        ISSN: 0143-2885            Impact factor:   5.264


  4 in total

1.  Cyclic fatigue of instruments for endodontic glide path.

Authors:  Gianluca Gambarini; Gianluca Plotino; GianPaolo Sannino; Nicola Maria Grande; Alessio Giansiracusa; Lucila Piasecki; Ulisses Xavier da Silva Neto; Dina Al-Sudani; Luca Testarelli
Journal:  Odontology       Date:  2013-11-07       Impact factor: 2.634

2.  Mechanical resistance of carbon and stainless steel hand instruments used in a reciprocating handpiece.

Authors:  Lucila Piasecki; Dina Al-Sudani; Alessio Giansiracusa Rubini; Giampaolo Sannino; Giampaolo Sonnino; Maurizio Bossù; Luca Testarelli; Roberto Di Giorgio; Ulisses Xavier da Silva-Neto; Christian Giampietro Brandão; Gianluca Gambarini
Journal:  Ann Stomatol (Roma)       Date:  2014-02-04

Review 3.  Evolution and development: engine-driven endodontic rotary nickel-titanium instruments.

Authors:  Yuhong Liang; Lin Yue
Journal:  Int J Oral Sci       Date:  2022-02-18       Impact factor: 24.897

4.  Apical Extrusion of Debris after Canal Preparation with Hand-Files Used Manually or Installed on Reciprocating Air-Driven Handpiece in Straight and Curved Canals.

Authors:  Hossein Labbaf; Leila Shakeri; Reza Orduie; Farshid Bastami
Journal:  Iran Endod J       Date:  2015-07-01
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.