Subretinal microsurgery with gradient index endoscopes.

State-of-the-art subretinal surgery involves a standard three-port pars plana entry, followed by an iatrogenic retinotomy to access the subretinal space. Subretinal manipulations through a small retinotomy are made possible by specially designed instruments. As the surgeon looks through the vitreous cavity, all subretinal maneuvers are obscured by the overlying retina. Consequently, the surgeon is operating 'blindly' and has to rely on 'feeling' rather than direct visualization. Micro-endoscopic viewing systems are the ideal solution for visualization during subretinal surgery. Until now, such endoscopes were either too large for intraocular use or lacked sufficient resolution, especially at a short working distance. Recently, a gradient index (GRIN) endoscope was developed (Insight Instruments, Inc., Lake Mary, Fla., USA) combining a small diameter (0.89 mm, 20 gauge) and incorporating excellent optical resolution, even at extremely close working distances. After ballooning a limited part of the retina without creating a retinal hole, the 20-gauge GRIN endoscope can be introduced into the subretinal space through the sclera and choroid, posterior to the pars plana. Surgical instruments can then be introduced into the subretinal space through a second neighboring sclerotomy. Thus, subretinal surgery can be performed under direct endoscopic control. As a result of direct visualization, the surgeon may perform certain surgical procedures with greater accuracy, i.e., subretinal neovascular membranes may be dissected meticulously from the neurosensory retina and retinal pigment epithelium, minimizing damage to both structures. The feeding choroidal vessel can be identified and directly coagulated, which is usually very difficult during conventional subretinal surgery. Endoscopic subretinal surgery is thus a significant improvement over conventional methods, avoiding the need for a retinotomy and increasing the safety and facility of the surgery itself.