Design and evaluation of a device for measuring three-dimensional micromotions of press-fit femoral stem prostheses.

Implant micromotion is considered to be a major factor in the loosening of cementless total hip replacements. Translational micromotion at the bone-implant interface generally occurs in all three spatial directions. Under physiological loading, the interfacial micromotion consists of a cyclic amplitude and changes in the mean, which, in the cranio-caudal direction, represents subsidence of the prosthesis. Existing measurement strategies, which are based on dial gauges, extensometers, LVDTs, hall-effect transducers or strain gauge techniques provide information about only one component of the general three-dimensional micromovement. Moreover, in the majority of the studies, the data are difficult to interpret due to the measured motions being composed of interfacial micromotion and femoral strains. A new transducer was designed that allows the accurate measurement of all three isolated components of micromotion. An optoelectronic approach, based on silicon position-sensitive detectors (PSD) in combination with high precision mechanical parts, was chosen. To exclude thermodrifts during long-term testing, a thermistor was integrated in the sensor. Validation experiments on a precision positioning table indicated the high precision and resolution of the developed sensors. Furthermore, in-vitro tests on a standard press-fit prosthesis demonstrated the easy handling and reliability of the system.