Role of oxygen in biodegradation of poly(etherurethane urea) elastomers.

It is generally accepted that biodegradation of poly(etheruethane urea) (PEUU) involves oxidation of the polyether segments on the surface where leukocytes are adhered. The influence of dissolved oxygen, which is known to control oxidation of polymers in more traditional environments, was explored in this study. Specimens treated in vitro with hydrogen peroxide-cobalt chloride for 12 days exhibited a brittle, degraded surface layer about 10 microm thick. Attenuated total reflectance-Fourier transform infrared spectroscopy of the surface revealed that the ether absorbance at 1110 cm(-1) gradually decreased with in vitro treatment time to 30% of its initial value after 12 days. In contrast, 6 days in vitro followed by 6 days in air produced a decrease to 12% of the initial volume. Therefore, removing a specimen from the in vitro solution after 6 days and exposing it to air for the remainder of the 12 days actually resulted in more oxidation than leaving it in the in vitro solution for the entire 12 days. These results suggest that PEUU degrades by an autooxidation mechanism sustained by oxygen. By successfully modeling the depth of the surface degraded layer with a diffusion-reaction model, it was demonstrated that PEUU biodegradation is controlled by diffusion of oxygen into the polymer.