Comparison of three methods for determining aflatoxins in melon seeds.

The suitability of 3 methods for determining aflatoxins in melon seeds was examined. The first 2 are the Contaminants Branch (CB) method and the Best Foods (BF) method, both official methods for determining aflatoxins in peanuts and peanut products. The third method, the modified CB method-Rapid Modification of the Cottonseed (CB-RCS-Mod) method, devised in this work, was derived by combining steps from the CB method and the Rapid Modification of the Cottonseed method. The CB method was superior to the other 2 methods for quantitation of aflatoxins. It gave better recoveries and cleaner extracts that exhibit less fluorescent interference for thin-layer chromatography (TLC) than the BF method. Also, its solvent efficiency was better than that of the CB-RCS-Mod method. With the CB method, recoveries from spiked samples were 85.0% for aflatoxin B1 and 90.0% for aflatoxin B2. Recoveries of G aflatoxins were more variable, averaging 90.0% for aflatoxin G1 and 72.5% for aflatoxin G2. Total aflatoxin recovery was 86.5% for the CB method. At a low aflatoxin contamination level (8 micrograms B1/kg sample), aflatoxin B1 was detectable by the CB method but not by the BF method. Detection of aflatoxins in BF method sample extracts by TLC was not improved by the use of chloroform-acetone-water (88 + 12 + 1), benzene-ethanol-water, or ether-methanol-water (96 + 3 + 1) in place of the standard chloroform-acetone (88 + 12) developer. Use of ether-methanol-water (96 + 3 + 1) for detecting aflatoxins by TLC in the CB method extracts increased interference compared with the standard chloroform-acetone (88 + 12) developer.