[Effect of surface energy on wear characteristics of material combinations for the artificial hip joint].

One of the factors determining the wear of UHMWPE used as acetabular cup material is the lubricating properties of the head materials. In order to determine the lubricating properties, the wettability of Al2O3, ZrO2, CoCrMo and N-coated TiAl6V4 was established. Wettability is determined by the surface energy of the head material (solid-state material), which was measured via the contact angle of drops of fluid. As head material, appropriate rings from the Ring-on-Disc Test as per International Standard 6474 were used. The poorest wettability was associated with CoCrMo. The wettability of Al2O3 and ZrO2 was comparable. Worthy of note is the tendentially good wettability of N-coated TiAl6V4.