Perfluorocarbon emulsions and cardiopulmonary bypass: a technique for the future.

Artificial blood has been sought for a considerable period of time and two major lines of research have led to FDA testing of some possible compounds. The two major types of compounds are polymerized hemoglobin moieties and perfluorocarbon emulsions (PFC). Polymerized hemoglobin preparations have the ability to carry oxygen and release it in a manner similar to the oxyhemoglobin dissociation curve of whole blood. PFCs carry oxygen, nitrogen and carbon dioxide, as well as all other non-polar gases, by enhanced chemical solubility. Therefore, all dissolved gases are available for metabolic utilization and no sinusoidal release curve of oxygen is encountered. Early PFC emulsions had problems with toxicity of the emulsifier and were difficult to get into their emulsion for infusion. Furthermore they were very dilute in the active ingredient for gas transport. Today there are second generation PFCs becoming available that have a 40% concentration of the PFC and therefore the potential for gas transport is greatly increased. The PFC emulsions have a very small size, 0.1 microns, so the surface for gas exchange is massively increased as well as the potential increased for perfusion into areas of potentially sludged erythrocytes. Work with the PFCs has shown them now to be able to carry adequate oxygen to work as blood substitutes. They have shown protection from air embolism in a number of animal and end-organ models. What makes the PFCs unique is their ability to carry/absorb nitrogen and therefore protect from gas embolization. There are data in animal models showing significant cerebral protection in cardiopulmonary bypass models. The new PFCs should sometime in the not-too-distant future be tested in human bypass with assessments of neuropsychiatric dysfunction and stroke.