Literature DB >> 8447769

Acrylic resins reinforced with woven highly drawn linear polyethylene fibres. 3. Mechanical properties and further aspects of denture construction.

N H Ladizesky1, M K Pang, T W Chow, I M Ward.   

Abstract

Previous work has established the feasibility of producing acrylic denture bases reinforced with layers of highly drawn linear polyethylene fibres in a woven form. This paper reports on the mechanical properties of the system, including the effect of water conditioning. It is confirmed that substantial improvements in impact strength can be obtained by the incorporation of the polyethylene fibres in woven form. The fibre/resin integration within the dentures has also been studied by optical microscopy. It was found that delamination may occur during some processing stages and steps are suggested to avoid this problem.

Entities:  

Mesh：

Substances：

Year:  1993        PMID： 8447769     DOI： 10.1111/j.1834-7819.1993.tb05448.x

Source DB:  PubMed          Journal:  Aust Dent J        ISSN： 0045-0421            Impact factor:   2.291


  6 in total

1.  The evaluation of some flexural properties of a denture base resin reinforced with various aesthetic fibers.

Authors:  Orhan Murat Doğan; Giray Bolayir; Selda Keskin; Arife Doğan; Bülent Bek
Journal:  J Mater Sci Mater Med       Date:  2007-12-23       Impact factor: 3.896

2.  The effect on the flexural strength, flexural modulus and compressive strength of fibre reinforced acrylic with that of plain unfilled acrylic resin - an in vitro study.

Authors:  Tony C Thomas; Aswini Kumar K; Shamaz Mohamed; Vinod Krishnan; Anil Mathew; Manju V
Journal:  J Clin Diagn Res       Date:  2015-03-01

3.  Effect of different palatal vault shapes on the dimensional stability of glass fiber-reinforced heat-polymerized acrylic resin denture base material.

Authors:  Mehmet Dalkiz; Demet Arslan; Ali Riza Tuncdemir; M Selim Bilgin; Halil Aykul
Journal:  Eur J Dent       Date:  2012-01

4.  Effect of fiber reinforcement on impact strength of heat polymerized polymethyl methacrylate denture base resin: in vitro study and SEM analysis.

Authors:  Tushar Krishnarao Mowade; Shankar Pandurang Dange; Mrunali Balkrushna Thakre; Vaibhav Deorao Kamble
Journal:  J Adv Prosthodont       Date:  2012-02-29       Impact factor: 1.904

5.  Effect of Reinforcement Using Stainless Steel Mesh, Glass Fibers, and Polyethylene on the Impact Strength of Heat Cure Denture Base Resin - An In Vitro Study.

Authors:  H B Mallikarjuna Murthy; Sharaz Shaik; Harleen Sachdeva; Sumit Khare; Satheesh B Haralur; K T Roopa
Journal:  J Int Oral Health       Date:  2015-06

6.  Effect of Water Storage on the Flexural Strength of Heat-cured Denture Base Resin Reinforced with Stick (s) Glass Fibers.

Authors:  Ankit Galav; Suryakant C Deogade; Sneha Mantri; K Sumathi; Sneha Galav
Journal:  Contemp Clin Dent       Date:  2017 Apr-Jun
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.