Literature DB >> 8304490

New experiments on shear modulus of elasticity of arteries.

S X Deng1, J Tomioka, J C Debes, Y C Fung.   

Abstract

Although the mechanical properties of blood vessels have been studied extensively, the shear modulus of the blood vessel wall is still unknown. New data on the shear modulus of elasticity of rat arteries and its variation with axial stretch and blood pressure are presented. The data were obtained from a new instrument designed and constructed by us to perform simultaneous torsion, inflation, and longitudinal stretching tests. It was found under physiological conditions (pressure = 120 mmHg or 16 kPa; longitudinal stretch = 1.2 relative to zero-stress state), the shear modulus of normal rat thoracic aorta is G = 137 +/- 18 kPa. The difference of shear modulus at body temperature (37 degrees C) and room temperature (25 degrees C) is within 10%. The shear modulus varies significantly with changing longitudinal and circumferential strains in proportion to the strain energy due to these strains. A constitutive equation based on a pseudo strain energy function is proposed. The vessel wall is not transversely isotropic in the incremental sense. When the rat was subjected to high blood pressure due to constriction of its aorta, the shear modulus does not vary significantly with the length of time the animal was subjected to hypertension.

Entities:  

Mesh:

Year:  1994        PMID: 8304490     DOI: 10.1152/ajpheart.1994.266.1.H1

Source DB:  PubMed          Journal:  Am J Physiol        ISSN: 0002-9513


  17 in total

1.  The degree of nonlinearity and anisotropy of blood vessel elasticity.

Authors:  J Zhou; Y C Fung
Journal:  Proc Natl Acad Sci U S A       Date:  1997-12-23       Impact factor: 11.205

2.  Arterial wall remodeling under sustained axial twisting in rats.

Authors:  Guo-Liang Wang; Li-Yi Wang; Shao-Xiong Yang; Ping Zhang; Xiao-Hu Chen; Qing-Ping Yao; Xiao-Bo Gong; Ying-Xin Qi; Zong-Lai Jiang; Hai-Chao Han
Journal:  J Biomech       Date:  2017-06-21       Impact factor: 2.712

3.  A Micromechanics Finite-Strain Constitutive Model of Fibrous Tissue.

Authors:  Huan Chen; Yi Liu; Xuefeng Zhao; Yoram Lanir; Ghassan S Kassab
Journal:  J Mech Phys Solids       Date:  2011-09-01       Impact factor: 5.471

4.  Modeling tissue-selective cavitation damage.

Authors:  Lauren Mancia; Eli Vlaisavljevich; Nyousha Yousefi; Mauro Rodriguez; Timothy J Ziemlewicz; Fred T Lee; David Henann; Christian Franck; Zhen Xu; Eric Johnsen
Journal:  Phys Med Biol       Date:  2019-11-15       Impact factor: 3.609

5.  Constitutive modeling of coronary arterial media--comparison of three model classes.

Authors:  Yaniv Hollander; David Durban; Xiao Lu; Ghassan S Kassab; Yoram Lanir
Journal:  J Biomech Eng       Date:  2011-06       Impact factor: 2.097

6.  Mechanical behavior and wall remodeling of blood vessels under axial twist.

Authors:  Hai-Chao Han; Qin Liu; Zong-Lai Jiang
Journal:  Yi Yong Sheng Wu Li Xue       Date:  2016-08

7.  Twist buckling of veins under torsional loading.

Authors:  Justin R Garcia; Arnav Sanyal; Fatemeh Fatemifar; Mohammad Mottahedi; Hai-Chao Han
Journal:  J Biomech       Date:  2017-05-05       Impact factor: 2.712

8.  The influence of medium elasticity on the prediction of histotripsy-induced bubble expansion and erythrocyte viability.

Authors:  Kenneth B Bader
Journal:  Phys Med Biol       Date:  2018-05-02       Impact factor: 3.609

9.  A frame-invariant formulation of Fung elasticity.

Authors:  Gerard A Ateshian; Kevin D Costa
Journal:  J Biomech       Date:  2009-03-17       Impact factor: 2.712

10.  Mechanical strength of aneurysmatic and dissected human thoracic aortas at different shear loading modes.

Authors:  Gerhard Sommer; Selda Sherifova; Peter J Oberwalder; Otto E Dapunt; Patricia A Ursomanno; Abe DeAnda; Boyce E Griffith; Gerhard A Holzapfel
Journal:  J Biomech       Date:  2016-02-26       Impact factor: 2.712

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.