Literature DB >> 8189703

Indentation analysis of biphasic articular cartilage: nonlinear phenomena under finite deformation.

J K Suh1, R L Spilker.   

Abstract

The nonlinear indentation response of hydrated articular cartilage at physiologically relevant rates of mechanical loading is studied using a two-phase continuum model of the tissue based on the theory of mixtures under finite deformation. The matrix equations corresponding to the governing mixture equations for this nonlinear problem are derived using a total Lagrangian penalty finite element method, and solved using a predictor-corrector iteration within a modified Newton-Raphson scheme. The stress relaxation indentation problem is examined using either a porous (free draining) indenter or solid (impermeable) indenter under fast and slow compression rates. The creep indentation problem is studied using a porous indenter. We examine the finite deformation response and compare with the response obtained using the linear infinitesimal response. Differences between the finite deformation response and the linear response are shown to be significant when the compression rate is fast or when the indenter is impermeable. The finite deformation model has a larger ratio of peak-to-equilibrium reaction force, and higher relaxation rate than the linear model during the early relaxation period, but a similar relaxation time. The finite deformation model predicts a slower creep rate than the linear model, as well as a smaller equilibrium creep displacement. The pressure distribution below the indenter, particularly near the loaded surface is also larger with the finite deformation model.

Entities:  

Mesh:

Year:  1994        PMID: 8189703     DOI: 10.1115/1.2895700

Source DB:  PubMed          Journal:  J Biomech Eng        ISSN: 0148-0731            Impact factor:   2.097


  8 in total

1.  Anisotropic hydraulic permeability under finite deformation.

Authors:  Gerard A Ateshian; Jeffrey A Weiss
Journal:  J Biomech Eng       Date:  2010-11       Impact factor: 2.097

2.  Three-dimensional fibril-reinforced finite element model of articular cartilage.

Authors:  L P Li; J T M Cheung; W Herzog
Journal:  Med Biol Eng Comput       Date:  2009-03-06       Impact factor: 2.602

3.  Multiphasic finite element framework for modeling hydrated mixtures with multiple neutral and charged solutes.

Authors:  Gerard A Ateshian; Steve Maas; Jeffrey A Weiss
Journal:  J Biomech Eng       Date:  2013-11       Impact factor: 2.097

4.  Biphasic Finite Element Modeling Reconciles Mechanical Properties of Tissue-Engineered Cartilage Constructs Across Testing Platforms.

Authors:  Gregory R Meloni; Matthew B Fisher; Brendan D Stoeckl; George R Dodge; Robert L Mauck
Journal:  Tissue Eng Part A       Date:  2017-04-14       Impact factor: 3.845

5.  An optical coherence tomography (OCT)-based air jet indentation system for measuring the mechanical properties of soft tissues.

Authors:  Yan-Ping Huang; Yong-Ping Zheng; Shu-Zhe Wang; Zhong-Ping Chen; Qing-Hua Huang; Yong-Hong He
Journal:  Meas Sci Technol       Date:  2009-01       Impact factor: 2.046

6.  Constitutive modeling of porcine liver in indentation using 3D ultrasound imaging.

Authors:  P Jordan; S Socrate; T E Zickler; R D Howe
Journal:  J Mech Behav Biomed Mater       Date:  2008-09-06

7.  Tractional Forces, Work and Energy Densities in the Human TMJ.

Authors:  Jeffrey C Nickel; Laura R Iwasaki; Luigi M Gallo; Sandro Palla; David B Marx
Journal:  Craniofac Growth Ser       Date:  2009-03

8.  Comparison between FEBio and Abaqus for biphasic contact problems.

Authors:  Qingen Meng; Zhongmin Jin; John Fisher; Ruth Wilcox
Journal:  Proc Inst Mech Eng H       Date:  2013-06-26       Impact factor: 1.617

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.