Literature DB >> 8148031

Marginal fit of restorations before and after cementation in vivo.

M Kern1, H G Schaller, J R Strub.   

Abstract

Triturated luting cements provide convenient clinical handling. This study clinically evaluated the influence of two trituration capsule cement systems on the marginal fit of inner copings for telescoping crowns. Using a randomized parallel design, one coping was cemented using zinc phosphate cement (Phosphacap) and one using a glass-ionomer cement (Ketac-Cem Maxicap) for each of 12 patients. A blind examination of the marginal fit of the restorations was made before and after cementation using the replica technique and a scanning electron microscope. The mean marginal discrepancies for all cast copings were approximately 30 microns (median 23 microns) before cementation. They increased significantly after cementation to 86 microns (median 63 microns) in the zinc phosphate cement copings but to only to 47 microns (median 44 microns) in the glass-ionomer cement copings.

Entities:  

Mesh:

Substances:

Year:  1993        PMID: 8148031

Source DB:  PubMed          Journal:  Int J Prosthodont        ISSN: 0893-2174            Impact factor:   1.681


  9 in total

1.  Evaluation of the Marginal Fit of CAD/CAM Crowns Fabricated Using Two Different Chairside CAD/CAM Systems on Preparations of Varying Quality.

Authors:  Walter Renne; Bethany Wolf; Raymond Kessler; Karen McPherson; Anthony S Mennito
Journal:  J Esthet Restor Dent       Date:  2015-07-14       Impact factor: 2.843

2.  Minimal intervention dentistry II: part 1. Contribution of the operating microscope to dentistry.

Authors:  Y Sitbon; T Attathom; A J St-Georges
Journal:  Br Dent J       Date:  2014-02       Impact factor: 1.626

3.  Influence of porcelain veneering on the marginal fit of Digident and Lava CAD/CAM zirconia ceramic crowns.

Authors:  Hyun-Soon Pak; Jung-Suk Han; Jai-Bong Lee; Sung-Hun Kim; Jae-Ho Yang
Journal:  J Adv Prosthodont       Date:  2010-06-30       Impact factor: 1.904

4.  Evaluation of the marginal fit of full ceramic crowns by the microcomputed tomography (micro-CT) technique.

Authors:  Necla Demir; Atiye Nilgun Ozturk; Meral Arslan Malkoc
Journal:  Eur J Dent       Date:  2014-10

5.  The marginal discrepancy of lithium disilicate onlays: Computer-aided design versus press.

Authors:  Leneena Gudugunta; Praffulla Mynampati; Matada Basavarajaiah Jeevan; Sathiyavathi Mahendra Kumar; Anitha Akkaloori; Sai Krishna Tejavath
Journal:  J Conserv Dent       Date:  2019 Jul-Aug

6.  Effects of Computer-Aided Manufacturing Technology on Precision of Clinical Metal-Free Restorations.

Authors:  Ki-Hong Lee; In-Sung Yeo; Benjamin M Wu; Jae-Ho Yang; Jung-Suk Han; Sung-Hun Kim; Yang-Jin Yi; Taek-Ka Kwon
Journal:  Biomed Res Int       Date:  2015-10-18       Impact factor: 3.411

7.  Comparison the Marginal and Internal Fit of Metal Copings Cast from Wax Patterns Fabricated by CAD/CAM and Conventional Wax up Techniques.

Authors:  M Vojdani; K Torabi; E Farjood; Aar Khaledi
Journal:  J Dent (Shiraz)       Date:  2013-09

8.  In vitro evaluation of the marginal and internal discrepancies of different esthetic restorations.

Authors:  Amal Abdelsamad Sakrana
Journal:  J Appl Oral Sci       Date:  2013 Nov-Dec       Impact factor: 2.698

9.  A Comparison of the Marginal and Internal Fit of Cobalt- Chromium Copings Fabricated by Two Different CAD/CAM Systems (CAD/ Milling, CAD/ Ceramill Sintron).

Authors:  Mahroo Vojdani; Kianoosh Torabi; Berivan Atashkar; Hossein Heidari; Mahshid Torabi Ardakani
Journal:  J Dent (Shiraz)       Date:  2016-12
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.