Literature DB >> 8024869

Denture fracture--a survey.

U R Darbar1, R Huggett, A Harrison.   

Abstract

The fracture of dentures is an unresolved problem. Despite increasing costs incurred by the nation on the repair of these prostheses, very little has been documented on the type of fracture encountered. This survey was carried out to determine the prevalence of type of fracture by the distribution of questionnaires to three different laboratories. Results obtained showed that 33% of the repairs carried out were due to debonded/detached teeth. Twenty-nine per cent were repairs to midline fractures, more commonly seen in upper complete dentures. The remaining 38% were other types of fractures, the majority of which constituted repairs to upper partial dentures. The latter involved detachment of acrylic resin saddles from the metal in metal based dentures and the fractures of connectors in the all-acrylic resin partial dentures.

Entities:  

Mesh:

Substances:

Year:  1994        PMID: 8024869     DOI: 10.1038/sj.bdj.4808449

Source DB:  PubMed          Journal:  Br Dent J        ISSN: 0007-0610            Impact factor:   1.626


  41 in total

1.  Remedy for repeated implant retained denture fracture-a challenging case report.

Authors:  Ramu Reddy M; Kiran Kumar Metta; Sudheer Charry N; Anulekha Avinash C K; Chittaranjan B
Journal:  J Clin Diagn Res       Date:  2014-11-20

2.  Midline Fractures in Single Maxillary Complete Acrylic vs Flexible Dentures.

Authors:  R K Dhiman; Sk Roy Chowdhury
Journal:  Med J Armed Forces India       Date:  2011-07-21

3.  The bond between acrylic resin denture teeth and the denture base: recommendations for best practice.

Authors:  D R Radford; A S Juszczyk; R K F Clark
Journal:  Br Dent J       Date:  2014-02       Impact factor: 1.626

4.  Fabricating a mandibular implant supported overdenture with a suspended framework.

Authors:  Swati Ahuja; Vinay Jain; David Cagna; Russell Wicks
Journal:  J Indian Prosthodont Soc       Date:  2012-10-19

5.  Effect of the combination of a crosslinking agent and a thiourethane additive on the properties of acrylic denture bases processed with microwave energy.

Authors:  Rafael L X Consani; Andreia B de Paula; Ana Paula P Fugolin; Carmem S Pfeifer
Journal:  J Mech Behav Biomed Mater       Date:  2019-06-10

6.  Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization.

Authors:  João Neudenir Arioli Filho; Luís Eduardo Butignon; Rodrigo de Paula Pereira; Matheus Guilherme Lucas; Francisco de Assis Mollo
Journal:  J Appl Oral Sci       Date:  2011 May-Jun       Impact factor: 2.698

7.  Effect of cavity preparation on the flexural strengths of acrylic resin repairs.

Authors:  Safa Salim Elhadiry; Norsiah Yunus; Yusnidar Tajul Ariffin
Journal:  J Appl Oral Sci       Date:  2010-12       Impact factor: 2.698

8.  Comparative evaluation of sorption, solubility and microhardness of heat cure polymethylmethacrylate denture base resin & flexible denture base resin.

Authors:  Jay Shah; Nilesh Bulbule; Shilpa Kulkarni; Riddhi Shah; Dilip Kakade
Journal:  J Clin Diagn Res       Date:  2014-08-20

9.  Flexural properties of a light-cure and a self-cure denture base materials compared to conventional alternatives.

Authors:  Emre Mumcu; Altug Cilingir; Burc Gencel; Tonguc Sülün
Journal:  J Adv Prosthodont       Date:  2011-09-25       Impact factor: 1.904

10.  Comparison of Mechanical Properties of PMMA Disks for Digitally Designed Dentures.

Authors:  Tamaki Hada; Manabu Kanazawa; Maiko Iwaki; Awutsadaporn Katheng; Shunsuke Minakuchi
Journal:  Polymers (Basel)       Date:  2021-05-26       Impact factor: 4.329

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.