Mechanical properties of long bones in dogs.

Basic research in canine mechanics must be performed to better understand the forces and moments the appendicular skeleton must withstand. This type of research may allow surgeons to make substantial advances in total joint replacement and fracture fixation design and may enhance our understanding of bone remodeling and fracture occurrence in relation to exercise and trauma. In our study, craniocaudal bending stiffness, mediolateral bending stiffness, axial compressive stiffness, and torsional stiffness of the humerus, femur, radius, and tibia of dogs was determined, using nondestructive bending, compression, and torsional tests. Entire diaphyseal and middiaphyseal properties of these long bones were evaluated. Bones also were tested to failure in torsion to quantify the failure properties of these long bones. Left to right variability was examined to validate the use of contralateral limbs as the control condition for experimental studies. There were no significant right to left differences in entire diaphyseal mechanical properties for any of the long bones, except for compressive stiffness of femurs. Homotypic differences in entire diaphyseal mechanical properties, if present, ranged from 8.0 to 35% for the 4 long bones (power = 0.8). For middiaphyseal mechanical properties, there were no significant right to left differences in the 4 long bones, except for craniocaudal bending stiffness of tibias. The homotypic differences in middiaphyseal mechanical properties, if present, ranged from 7.2 to 62% for the 4 long bones (power = 0.8). In all bones and loading modes, middiaphyseal stiffness was greater than entire diaphyseal stiffness (P < 0.0001).(ABSTRACT TRUNCATED AT 250 WORDS)