Literature DB >> 7765948

Prediction of mechanical damage to animal cells in turbulence.

C R Thomas1, M al-Rubeai, Z Zhang.   

Abstract

In previous work a model was proposed for estimation of disruption of animal cells in turbulent capillary flows using information about the hydrodynamics, and cell mechanical properties determined by micromanipulation. The model assumed that the capillary flow consists of a laminar sublayer and a homogeneous turbulent region, and within the latter eddies of sizes similar to or smaller than the cells interact with those cells, causing local surface deformations. The proposed mechanism of cell damage was that such deformations result in an increase in membrane tension and surface energy, and that a cell disrupts when its bursting membrane tension and bursting surface energy are exceeded. The surface energy of the cells was estimated from the kinetic energy of appropriate sized eddies. To test the model, cells were disrupted in turbulent flows in capillaries at mean energy dissipation rates ranging from 800 to 2 x 10(4) Wkg-1. The model assumed that the specific lysis rate is almost independent of the number of passes, which was verified by the experimental data. The implication was that despite the damage the cell mechanical properties did not change markedly during multiple recirculations through the capillaries. On average the model underestimated the cell disruption by about 15%. Although the model gave reasonably good predictions, it lacks proper explanation of the independence of the specific lysis rate on the number of passes. In this paper it is shown that this problem can be resolved in principle by consideration of the localisation of the energy dissipation in turbulent capillary flows. The necessity of further modelling of cell-turbulence interactions is demonstrated.

Entities:  

Mesh:

Year:  1994        PMID: 7765948     DOI: 10.1007/BF00762408

Source DB:  PubMed          Journal:  Cytotechnology        ISSN: 0920-9069            Impact factor:   2.058


  5 in total

1.  A novel micromanipulation technique for measuring the bursting strength of single mammalian cells.

Authors:  Z Zhang; M A Ferenczi; A C Lush; C R Thomas
Journal:  Appl Microbiol Biotechnol       Date:  1991-11       Impact factor: 4.813

2.  Estimation of disruption of animal cells by turbulent capillary flow.

Authors:  Z Zhang; M Al-Rubeai; C R Thomas
Journal:  Biotechnol Bioeng       Date:  1993-10       Impact factor: 4.530

3.  Estimation of disruption of animal cells by laminar shear stress.

Authors:  C Born; Z Zhang; M Al-Rubeai; C R Thomas
Journal:  Biotechnol Bioeng       Date:  1992-11       Impact factor: 4.530

4.  Flow effects on the viability and lysis of suspended mammalian cells.

Authors:  Anne McQueen; Eliane Meilhoc; James E Bailey
Journal:  Biotechnol Lett       Date:  1987-12       Impact factor: 2.461

5.  Effect of shear on the death of two strains of mammalian tissue cells.

Authors:  D C Augenstein; A J Sinskey; D I Wang
Journal:  Biotechnol Bioeng       Date:  1971-05       Impact factor: 4.530

  5 in total
  4 in total

1.  Factors limiting the commercial application of animal cells in culture.

Authors:  R E Spier
Journal:  Cytotechnology       Date:  1997-01       Impact factor: 2.058

2.  The potential of hydrodynamic damage to animal cells of industrial relevance: current understanding.

Authors:  Weiwei Hu; Claudia Berdugo; Jeffrey J Chalmers
Journal:  Cytotechnology       Date:  2011-07-22       Impact factor: 2.058

3.  Effects of energy dissipation rate on islets of Langerhans: implications for isolation and transplantation.

Authors:  Rustin M Shenkman; Ruben Godoy-Silva; Klearchos K Papas; Jeffrey J Chalmers
Journal:  Biotechnol Bioeng       Date:  2009-06-01       Impact factor: 4.530

4.  High shear resistance of insect cells: the basis for substantial improvements in cell culture process design.

Authors:  Florian Strobl; Mark Duerkop; Dieter Palmberger; Gerald Striedner
Journal:  Sci Rep       Date:  2021-05-03       Impact factor: 4.379

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.