Literature DB >> 7758273

Effect of leucite crystals on the strength of glassy porcelain.

M Kon1, F Kawano, K Asaoka, N Matsumoto.   

Abstract

Porcelains with leucite crystals dispersed into various glass matrices were prepared for investigating the effects of the leucite crystals on the mechanical strength of glassy porcelain. The strength of glassy porcelains containing leucite crystals was affected by the differences of thermal expansion coefficients, compositions and deformation temperatures of the glass matrices. In the case of a large mismatch of thermal expansion between the leucite crystals and boro-silicate glass, the strength decreased with increasing amount of leucite. In leucite porcelains using a feldspar glass matrix, there was little or no effect of leucite on the strength. However, the strength of porcelains consisting of leucite crystals and a soda-lime glass matrix was enhanced with increasing leucite content, compared with that of the glassy matrix alone. Such an increase in strength is considered to be because the interface between the glassy matrix and leucite particles occurred in continuous phases, with an effect due to fusion occurring during the transition from leucite particles to the glass phase.

Entities:  

Mesh:

Substances:

Year:  1994        PMID: 7758273     DOI: 10.4012/dmj.13.138

Source DB:  PubMed          Journal:  Dent Mater J        ISSN: 0287-4547            Impact factor:   2.102


  5 in total

1.  Microstructure effect on the properties of a commercial low-fusing dental porcelain.

Authors:  Athena Tsetsekou; Triantafillos Papadopoulos; Othon Adamopoulos
Journal:  J Mater Sci Mater Med       Date:  2002-04       Impact factor: 3.896

2.  Influence of residual thermal stresses on the edge chipping resistance of PFM and veneered zirconia structures: Experimental and FEA study.

Authors:  Carina B Tanaka; Rafael Y Ballester; Grace M De Souza; Yu Zhang; Josete B C Meira
Journal:  Dent Mater       Date:  2018-12-20       Impact factor: 5.304

3.  Effect of hydrofluoric acid surface treatments on micro-shear bond strength of CAD/CAM ceramics.

Authors:  Faraneh Mokhtarpour; Homayoon Alaghehmand; Soraya Khafri
Journal:  Electron Physician       Date:  2017-10-25

4.  Effects of incorporation of silver and titanium nanoparticles on feldspathic ceramic toughness.

Authors:  Vasudevan Karthikeyan; Naveen Gopi Chander; Jetti Ramesh Reddy; Balasubramanium Muthukumar
Journal:  J Dent Res Dent Clin Dent Prospects       Date:  2019-08-14

5.  The effect of silane applied to glass ceramics on surface structure and bonding strength at different temperatures.

Authors:  Tevfik Yavuz; Oguz Eraslan
Journal:  J Adv Prosthodont       Date:  2016-04-21       Impact factor: 1.904

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.