Literature DB >> 7729404

A national cross-sectional study in the Danish wood and furniture industry on working postures and manual materials handling.

H Christensen1, M B Pedersen, G Sjøgaard.   

Abstract

Musculoskeletal disorders constitute a major problem in the wood and furniture industry and identification of risk factors is needed urgently. Therefore, exposures to different work tasks and variation in the job were recorded based on an observation survey in combination with an interview among 281 employees working in wood working and painting departments. A questionnaire survey confirmed high frequencies of symptoms from the musculoskeletal system: The one-year prevalence of symptoms from the low back was 42% and symptoms from the neck/shoulder was 40%. The exposure was evaluated based on: (1) classification of work tasks, (2) work cycle time, (3) manual materials handling, (4) working postures, and (5) variation in the job. Among the employees 47% performed feeding or clearing of machines, 35% performed wood working or painting materials, and 18% performed various other operations. Among the employees 20% had no variation in their job while 44% had little variation. Manual materials handling of 375 different burdens was observed, which most often occurred during feeding or clearing of machines. The weight of burdens lifted was 0.5-87.0 kg, where 2% had a weight of more than 50 kg. Among the lifting conditions 30% were evaluated as implying a risk of injury. An additional risk factor was the high total tonnage lifted per day, which was estimated to range from 132 kg to 58,800 kg. Working postures implied a risk of injury due to prolonged forward and lateral flexions of the neck, which was seen most frequently during wood working or painting materials. These data substantiate the finding that work tasks mainly during feeding or clearing of machines imply a risk of injury to the low back and a risk of injury to the neck and shoulder area mainly during wood working or painting materials. Optimal strategies for job redesign may be worked out by using these data in order to prevent occupational musculoskeletal disorders.

Entities:  

Mesh:

Year:  1995        PMID: 7729404     DOI: 10.1080/00140139508925150

Source DB:  PubMed          Journal:  Ergonomics        ISSN: 0014-0139            Impact factor:   2.778


  3 in total

1.  Statistical performance of observational work sampling for assessment of categorical exposure variables: a simulation approach illustrated using PATH data.

Authors:  Svend Erik Mathiassen; Jennie A Jackson; Laura Punnett
Journal:  Ann Occup Hyg       Date:  2013-12-18

2.  Low Back Pain among Workers in a Paint Factory.

Authors:  Abdulrazag H Al-Salameen; Hassan A Abugad; Sultan T Al-Otaibi
Journal:  Saudi J Med Med Sci       Date:  2018-12-14

3.  The association between back pain and trunk posture of workers in a special school for the severe handicaps.

Authors:  Kelvin C H Wong; Raymond Y W Lee; Simon S Yeung
Journal:  BMC Musculoskelet Disord       Date:  2009-04-29       Impact factor: 2.362

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.