The throw: biomechanics and acute injury.

The throw and its modifications are integral components of many sports. This study correlates case histories of acute injuries in throwing with a biomechanical analysis of the throwing mechanism. Comparisons are made with a similar analysis of the kick analyzed by the same film technique and computer program. Just prior to ball release, the pitching arm extends through an arc of about 73 degress in 40 msec, beginning with the elbow flexed at 80 degrees. This produces an axial load on the humerus and coincides with a pulse of external torque at the shoulder. This acts as stress protection to the humerus which is developing an internal torque of 14,000 inch-lb prior to ball release. The change in angular velocity, or the angular acceleration, during the throw is acquired in a much shorter time than in the kick. Torque is directly proportional to angular acceleration. This necessitates the development of substantially higher torques in the humerus during the throw than about the knee during a kick. The kinetic energy in the arm is 27,000 inch-lb during the throw. This is much higher than the kinetic energy in the kicking leg because the kinetic energy varies proportionally with the square of the angular velocity of the extremity. The angular velocity of the arm is about twice that of the leg. Thus, the pitching arm contains about four times as much kinetic energy as the kicking leg. These severe overloading conditions predispose the upper extremity to injury in the throwing mechanism.