Literature DB >> 6643530

Some mechanical properties of goose femoral cortical bone.

G B McAlister, D D Moyle.   

Abstract

The ultimate compressive strength and modulus of elasticity of femoral cortical bone from adult geese (Anser anser), were determined by sex and by quadrant by compressing small right circular cylinders which were 2.4 mm in height and 0.8 mm in diameter. The average ultimate compressive strength was 183 +/- 29 MPa. The average modulus of elasticity was 13.2 +/- 3.4 GPa. The bending strength and bending modulus of elasticity were determined by a three point bend test on rectangular prisms which had the approximate dimensions 0.75 mm X 0.75 mm X 25 mm. The average bending strength was 263 +/- 44 MPa while the average bending modulus was 19.6 +/- 3.1 GPa. The calcium content was determined by atomic absorption spectrophotometry and no correlation was found with the mechanical properties. The histology of the cortical bone was examined both quantitatively and qualitatively. A unique type of Haversian bone is described. Goose bone was found to be morphologically similar to adolescent human bone and to have mechanical properties similar to those of adult human bone.

Entities:  

Mesh:

Substances:

Year:  1983        PMID: 6643530     DOI: 10.1016/0021-9290(83)90108-2

Source DB:  PubMed          Journal:  J Biomech        ISSN: 0021-9290            Impact factor:   2.712


  3 in total

1.  Elastic modulus and strength of emu cortical bone.

Authors:  K L Reed; T D Brown
Journal:  Iowa Orthop J       Date:  2001

2.  Effects of magnesium deficiency on strength, mass, and composition of rat femur.

Authors:  M A Kenney; H McCoy; L Williams
Journal:  Calcif Tissue Int       Date:  1994-01       Impact factor: 4.333

3.  Effect of trabecular bone loss on cortical strain rate during impact in an in vitro model of avian femur.

Authors:  Tal Reich; Amit Gefen
Journal:  Biomed Eng Online       Date:  2006-07-19       Impact factor: 2.819

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.