An aerosol generator for the resuspension of cotton dust.

An aerosol generator, the Pitt 3 model, was designed, fabricated, and characterized for the resuspension of inhalable particles from bulk cotton dust. The generator was constructed around a loudspeaker whose energy is transferred into an air column through latex rubber dams. This action tumbles the bulk dust, and small particles are loosened which can then be carried out of the column with the air passing through it. Thirty to forty grams of bulk cotton dust produced a stable aerosol concentration for at least 90 min. The maximum output of about 100 mg/m3 can be reduced to lower concentrations by adding dilution air. In one application, the generator produced a stable aerosol cloud in the range of 2 to 30 mg/m3 with a mass median aerodynamic diameter (MMAD) of about 3 microns and a geometric standard deviation (sigma g) of about 1.5. In another application the concentration in an animal exposure chamber was kept at 20.8 mg/m3 with an MMAD = 2.5 microns and a sigma g = 1.8 for over 6 months. The Pitt 3 generator proved to be trouble-free and produced large amounts of inhalable particles from bulk cotton dust. The generator was also used to generate dust clouds from silica powder, fly ash, and cellulose dust. The only requirement for successful resuspension of any dust with this generator is the presence of small particles in the bulk feed dust.