Bone conduction mechanisms: Mössbauer measurements on the role of ossicular inertia.

The Mössbauer technique was used to measure displacements of the stapes footplate and adjacent temporal bone during bone conduction stimulation at frequencies from 250 to 400 Hz in anaesthetized guinea pigs. The stapes was found not to be driven at amplitudes or phases that differed significantly from those of the temporal bone. Measurement of stapes displacements during air conduction stimulation, and of temporal bone displacements during bone conduction stimulation producing matching cochlear microphonic amplitude, enabled calculation of limiting values of amplitude and phase difference necessary to produce the required relative displacement. The obtained values (less than 1 dB for amplitude and 1--4 degrees for phase) were beyond the resolution of the measurement system employed for reasonable nuclear counting times. The results provide quantitative estimates of the magnitude of inertial effects, but do not establish whether ossicular inertia is an important factor in bone conduction stimulation.