Titanium fibermetal segmental replacement prostheses. A radiographic analysis and review of current status.

Thirteen patients with titanium fibermetal segmental bone/joint prostheses at a minimum follow-up period of six months were reviewed. Detailed radiographic data were analyzed quantitatively in terms of stem/bone interface radiolucency and bone bridging over the segmental portion of the prosthesis at predefined zones. Although stem radiolucent lines were common in this series, only one case had clinical loosening and required reoperation. There were two cases of stem fracture; one achieved extracortical bone union without revision, and the other case required implant removal and revision. Analysis of the retrieved specimen revealed histologic evidence of bony ingrowth. The use of a long side plate for initial implant fixation might have been partially responsible for this complication because of inhibition of new bone formation over the porous-coated segment. Sequential study of radiograms at different follow-up time periods with the same zonal analysis criteria revealed that no progression of radiolucency occurred at the bone/prosthesis interface, and bone formation over the segmental portion either increased or stabilized with time. The patients' functional results and implant performance seemed to indicate that the porous-coated segmental prosthetic system was effective in bridging skeletal/joint defects. However, further improvements are needed in prosthetic design and implant quality control in order to minimize device-related complications.