Influence of ADP, blood flow velocity, and vessel diameter on the laser-induced thrombus formation.

The laser-induced thrombus model in rat mesenteric arterioles and venules represents a reliable and reproducible in vivo method. It is suitable for basic investigations concerning factors involved in thrombus formation as well as for testing antithrombotic effects of drugs. The laser-induced thrombus formation depends significantly on the presence of ADP, as ADP-utilizing enzymes inhibit thrombosis in the animal model. The instrumental test set-up consists of a 4 W Argon laser (Spectra Physics, Mountain View, CA, USA), a ray adaptation and adjusting device (BTG, Munich, FRG), a microscope (ICM 405, Zeiss, Oberkochen, FRG), and a video system (Sony, Japan). RBC velocity data were recorded with the help of a modified dual-slit technique (acc. to Wayland and Johnson). Results were expressed as number of laser injuries necessary to produce a defined thrombus (minimum size: 1/4 of the vessel diameter) under constant conditions (effective capacity: 30 mW, exposure time: 1/5 sec). The number of laser lesions necessary to induce a defined thrombus decreased with an increase in arteriole diameter (10 to 20 micron) but increased again in larger arterioles and small arteries (greater than 25 micron). On the arteriolar side there are significant correlation coefficients between vessel diameter and RBC velocity (r = 0.69), vessel diameter and No. of laser injuries (r = 0.70), and RBC velocity and No. of laser injuries (r = 0.71). Due to relative low flow conditions in the venules, the number of laser injuries required to induce a defined thrombus does not significantly depend on the vessel diameter.