Literature DB >> 369407

Finishing of enamel surfaces after debonding of orthodontic attachments.

D H Retief, F R Denys.   

Abstract

The finishing of enamel surfaces after removal of directly bonded attachments is essential. The following procedures are suggested: 1. The bonding of mesh-backed stainless steel brackets with a lightly filled resin system. 2. Debonding of attachments with a direct bonding bracket remover. 3. Removal of the bulk of the remaining resin with a 12-bladed tungsten carbide bur operated at high speed with adequate air cooling. 4. Finishing of the residual resin and underlying enamel with graded polishing discs or Ceramisté wheels used with light pressure and adequate air cooling. 5. Final finishing with a rubber cup and a water slurry of pumice.

Entities:  

Mesh：

Substances：

Year:  1979        PMID： 369407     DOI： 10.1043/0003-3219(1979)049<0001:FOESAD>2.0.CO;2

Source DB:  PubMed          Journal:  Angle Orthod        ISSN： 0003-3219            Impact factor:   2.079


  19 in total

1.  Qualitative and quantitative evaluation of human dental enamel after bracket debonding: a noncontact three-dimensional optical profilometry analysis.

Authors:  Fabiano G Ferreira; Darcy F Nouer; Nelson P Silva; Ivana U Garbui; Lourenço Correr-Sobrinho; Paulo R A Nouer
Journal:  Clin Oral Investig       Date:  2013-12-11       Impact factor: 3.573

2.  Roughness of enamel surfaces after different bonding and debonding procedures : An in vitro study.

Authors:  Lorenz M Brauchli; Eva-Maria Baumgartner; Judith Ball; Andrea Wichelhaus
Journal:  J Orofac Orthop       Date:  2011-03-11       Impact factor: 1.938

3.  Effect of Various Finishing Procedures on the Reflectivity (Shine) of Tooth Enamel - An In-vitro Study.

Authors:  Harshal Ashok Patil; Shrikant Shrinivas Chitko; Veerendra Virupaxappa Kerudi; Amit Ratanlal Maheshwari; Neeraj Suresh Patil; Pawankumar Dnyandeo Tekale; Ketan Ashorao Gore; Amit Ashok Zope
Journal:  J Clin Diagn Res       Date:  2016-08-01

4.  [Insertion of the Prophy-Jet instrument for enamel polishing after debonding].

Authors:  M Hannemann; P Diedrich
Journal:  Fortschr Kieferorthop       Date:  1986-08

5.  Thermal imaging of the pulp during residual adhesive removal.

Authors:  Gökmen Kurt; Nisa Gül; Özgür Er; Gülşen Çakmak; Emre Bendeş; Veysel Aslantaş
Journal:  J Orofac Orthop       Date:  2017-07       Impact factor: 1.938

6.  Evaluation of Enamel Surface Roughness after Various Finishing Techniques for Debonding of Orthodontic Brackets.

Authors:  Emire Aybüke Erdur; Mehmet Akın; Leyla Cime; Zehra İleri
Journal:  Turk J Orthod       Date:  2016-03-01

7.  Enamel surface evaluation after bracket debonding and different resin removal methods.

Authors:  Michele Machado Vidor; Rafael Perdomo Felix; Ernani Menezes Marchioro; Luciane Hahn
Journal:  Dental Press J Orthod       Date:  2015 Mar-Apr

Review 8.  Effect of orthodontic debonding and adhesive removal on the enamel - current knowledge and future perspectives - a systematic review.

Authors:  Joanna Janiszewska-Olszowska; Tomasz Szatkiewicz; Robert Tomkowski; Katarzyna Tandecka; Katarzyna Grocholewicz
Journal:  Med Sci Monit       Date:  2014-10-20

9.  Enamel surface roughness after debonding of orthodontic brackets and various clean-up techniques.

Authors:  Farzaneh Ahrari; Majid Akbari; Javad Akbari; Ghahraman Dabiri
Journal:  J Dent (Tehran)       Date:  2013-01-31

10.  Enamel Surface Evaluation after Removal of Orthodontic Composite Remnants by Intraoral Sandblasting Technique and Carbide Bur Technique: A Three-Dimensional Surface Profilometry and Scanning Electron Microscopic Study.

Authors:  Amol C Mhatre; Arundhati P Tandur; Sumitra S Reddy; B C Karunakara; H Baswaraj
Journal:  J Int Oral Health       Date:  2015
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.