| Literature DB >> 36142034 |
Makoto Suzuki1,2, Tomoya Ishida1,2, Mina Samukawa1, Hisashi Matsumoto2, Yu Ito2, Yoshimitsu Aoki3, Harukazu Tohyama1.
Abstract
This study aims to compare the limb symmetry index (LSI) of the rate of torque development (RTD) of the quadriceps with that of the peak torque after anterior cruciate ligament reconstruction (ACLR) using semitendinosus and gracilis tendon (STG) autografts and to investigate the associations of the LSI of torque parameters with patient-reported knee function. The participants included 23 female athletes after ACLR with STG grafts. Isometric quadriceps tests were performed using an isokinetic dynamometer. The peak torque, RTD100 (0 to 100 ms) and RTD200 (100 to 200 ms) were determined using torque-time curves. Comparisons of the LSI of torque parameters was performed by ANOVA. Univariate regression analysis was used to examine the relationship between the LSI of torque parameters and the patient-reported knee function. The LSIs of the peak torque and RTD200 were significantly lower than that of the RTD100 (p = 0.049, p = 0.039, respectively). Regression analysis showed that the LSI of the peak torque was associated with the patient-reported knee function (R2 = 0.40, p = 0.001). It would be useful to evaluate the peak torque in young female athletes under the age of 18 and at 8-10 months after ACLR with STG grafts.Entities:
Keywords: anterior cruciate ligament reconstruction; patient-reported knee function; quadriceps function
Mesh:
Year: 2022 PMID: 36142034 PMCID: PMC9517280 DOI: 10.3390/ijerph191811761
Source DB: PubMed Journal: Int J Environ Res Public Health ISSN: 1660-4601 Impact factor: 4.614
Figure 1Rate of torque development (RTD) from the slope of the torque–time curve. RTD100 is calculated from 0 to 100 ms, and RTD200 is calculated from 100 to 200 ms.
Interlimb differences in the RTD100, RTD200, and peak torque.
| Involved Limb | Uninvolved Limb | LSI |
| ||
|---|---|---|---|---|---|
| RTD100, Nm/s/kg/m | 5.9 (1.9) | 6.1 (1.8) | 96.7 (17.1) | 0.304 | 0.219 |
| RTD200, Nm/s/kg/m | 4.1 (1.3) | 4.7 (1.2) | 87.6 (14.2) | <0.001 | 0.830 |
| Peak torque, Nm/kg/m | 1.5 (0.3) | 1.8 (0.3) | 86.7 (13.3) | <0.001 | 1.000 |
Mean (SD). * indicates the results of a paired t-test comparing the involved limb with the uninvolved limb. Significant differences are shown in bold. RTD100, rate of torque development from 0 to 100 ms; RTD200, rate of torque development from 100 to 200 ms.
Figure 2LSI of RTD100, RTD200 and peak torque. p-values indicate the results of post hoc tests. RTD, rate of torque development.
Figure 3Association between IKDC-SKF score and the LSI of the torque parameters. (a) RTD100, (b) RTD200, (c) Peak torque.