Effect of Pressure Difference between Inner and Outer Gas Layer on Micro-Tube Deformation during Gas-Assisted Extrusion.

In the process of double-layer gas-assiste extrusion of a plastic micro-tube, the tugging effect caused by the pressure difference of the gas cushion layer inside the die has a great influence on the external dimensions of the micro-tube. Therefore, this study establishes a two-phase extrusion model based on compressible gas and incompressible melt. Ansys Polyflow finite element software was used to numerically simulate the extrusion process of the melt to analyze the effect of the gas cushion layer pressure difference on the micro-tube deformation. The research shows that the shrinkage rate of the micro-tube increases with increasing pressure of the outer cushion layer, and the degree of tube wall migration increases, too. In the process of extrusion, the first normal stress difference at the entrance of the gas cushion layer shows a significant effect on the melt velocity field distribution and the extruded micro-tube cross-sectional deformation.