Background: Right ventricular (RV) function can be quantified by right heart catheterization-derived pressure-volume loops. While this technique is invasive, echocardiography-based volume-strain loops (VSLs) potentially reflect a non-invasive alternative. In this study, an approach to generate VSLs from volume and multidimensional strain data of 3D echocardiography-derived RV mesh models is evaluated with regard to feasibility and reproducibility. Methods: In a retrospective cohort study design, 3D intraoperative transesophageal echocardiograms of twenty-three patients undergoing aortic valve surgery (AVS) and eighteen patients undergoing off-pump coronary artery bypass (OPCAB) grafting were available prior to sternotomy and after sternal closure. RV meshes were generated using 3D speckle-tracking. Custom-made software quantified the meshes' volumes, global longitudinal (RV-GLS) and global circumferential strain (RV-GCS) for VSL generation. Linear regression of systolic VSLs yielded slopes, intercepts and systolic areas. Polynomial regression of two orders was used to analyze systolic-diastolic coupling at 10% increments of the RV end-diastolic volume (RVEDV). Reproducibility was analyzed by fourfold double-measurements of four datasets. Results: VSL calculation was feasible from all included 3D datasets. RV-GLS remained unaltered, but RV-GCS worsened in AVS [abs. diff. (∆) 3.9%, P<0.01] and OPCAB patients (∆4.5%, P<0.001). While RV-GCS systolic areas were markedly reduced at the end of AVS (∆268mL%, P<0.01) and OPCAB (∆185mL%, P<0.001), RV-GCS slopes did not change. Systolic-diastolic uncoupling was not observed, but in trend, decreased diastolic RV-GCS after AVS (P=0.06) and increased diastolic RV-GCS after OPCAB (P=0.06) were observed. Intraclass correlation coefficients (0.84-0.98) and coefficients of variation (6.4-11.8%) indicated good reproducibility. Conclusions: RV VSL generation using 3D echocardiography-derived mesh models is feasible. Longitudinal and circumferential strain vectors yield intrinsically different VSL indices. In future investigations, VSLs of multidimensional strains could provide further insight into periprocedural changes of RV mechanics. 2022 Quantitative Imaging in Medicine and Surgery. All rights reserved.
Background: Right ventricular (RV) function can be quantified by right heart catheterization-derived pressure-volume loops. While this technique is invasive, echocardiography-based volume-strain loops (VSLs) potentially reflect a non-invasive alternative. In this study, an approach to generate VSLs from volume and multidimensional strain data of 3D echocardiography-derived RV mesh models is evaluated with regard to feasibility and reproducibility. Methods: In a retrospective cohort study design, 3D intraoperative transesophageal echocardiograms of twenty-three patients undergoing aortic valve surgery (AVS) and eighteen patients undergoing off-pump coronary artery bypass (OPCAB) grafting were available prior to sternotomy and after sternal closure. RV meshes were generated using 3D speckle-tracking. Custom-made software quantified the meshes' volumes, global longitudinal (RV-GLS) and global circumferential strain (RV-GCS) for VSL generation. Linear regression of systolic VSLs yielded slopes, intercepts and systolic areas. Polynomial regression of two orders was used to analyze systolic-diastolic coupling at 10% increments of the RV end-diastolic volume (RVEDV). Reproducibility was analyzed by fourfold double-measurements of four datasets. Results: VSL calculation was feasible from all included 3D datasets. RV-GLS remained unaltered, but RV-GCS worsened in AVS [abs. diff. (∆) 3.9%, P<0.01] and OPCAB patients (∆4.5%, P<0.001). While RV-GCS systolic areas were markedly reduced at the end of AVS (∆268mL%, P<0.01) and OPCAB (∆185mL%, P<0.001), RV-GCS slopes did not change. Systolic-diastolic uncoupling was not observed, but in trend, decreased diastolic RV-GCS after AVS (P=0.06) and increased diastolic RV-GCS after OPCAB (P=0.06) were observed. Intraclass correlation coefficients (0.84-0.98) and coefficients of variation (6.4-11.8%) indicated good reproducibility. Conclusions: RV VSL generation using 3D echocardiography-derived mesh models is feasible. Longitudinal and circumferential strain vectors yield intrinsically different VSL indices. In future investigations, VSLs of multidimensional strains could provide further insight into periprocedural changes of RV mechanics. 2022 Quantitative Imaging in Medicine and Surgery. All rights reserved.
Entities:
Keywords:
Three-dimensional echocardiography; cardiac surgery; right ventricle; volume-strain loops
Authors: Heleen B van der Zwaan; Marcel L Geleijnse; Jackie S McGhie; Eric Boersma; Willem A Helbing; Folkert J Meijboom; Jolien W Roos-Hesselink Journal: Eur J Echocardiogr Date: 2011-08-02
Authors: Marius Keller; Tobias Lang; Andreas Schilling; Martina Nowak-Machen; Peter Rosenberger; Harry Magunia Journal: Int J Cardiovasc Imaging Date: 2019-07-18 Impact factor: 2.357
Authors: Geert Kleinnibbelink; Hugo G Hulshof; Arie P J van Dijk; Tim Ten Cate; Keith P George; David L Oxborough; Dick H J Thijssen Journal: J Am Soc Echocardiogr Date: 2020-12-16 Impact factor: 5.251
Authors: Jose-Luis Moya Mur; Ana García Martín; Alberto García Lledó; Carla Lázaro Rivera; Luis Miguel Rincón Díaz; Javier Miguelena Hycka; Ilaria Boretti; Camila Gimaraes; Eduardo Casas Rojo; Jose-Julio Jiménez Nacher; Covadonga Fernández-Golfín; Jorge Rodríguez-Roda Stuart; José Luis Zamorano Journal: Int J Cardiovasc Imaging Date: 2018-08-02 Impact factor: 2.357
Authors: Martina Nowak-Machen; Tobias Lang; Andreas Schilling; Lisa Mockenhaupt; Marius Keller; Peter Rosenberger; Harry Magunia Journal: J Cardiothorac Vasc Anesth Date: 2019-02-13 Impact factor: 2.628
Authors: P A McKenney; C S Apstein; L A Mendes; G P Connelly; G S Aldea; R J Shemin; R Davidoff Journal: J Am Coll Cardiol Date: 1994-11-01 Impact factor: 24.094