| Literature DB >> 35711787 |
Siren Hu1, Kaiqin Li1, Yifei Zhang1, Yinfeng Wang1, Li Fu1, Yan Xiao1, Xinke Tang1, Jian Gao1,2.
Abstract
Multi-locus sequence analysis (MLSA) has been proved to be a useful method for Streptomyces identification and MLSA distance of 0.007 is considered as the boundary value. However, we found that MLSA distance of 0.007 might be insufficient to act as a threshold according to the correlations among average nucleotide identity based on MuMmer ultra-rapid aligning tool (ANIm), digital DNA-DNA hybridization (dDDH) and MLSA from the 80 pairs of Streptomyces species; in addition, a 70% dDDH value did not correspond to a 95∼96% ANIm value but approximately to 96.7% in the genus Streptomyces. Based on our analysis, it was proposed that when the MLSA distance value between a novel Streptomyces and a reference strain was < 0.008, the novel strain could be considered as a heterotypic synonym of the reference strain; when the MLSA distance value was ≥ 0.014, the novel strain could be regarded as a new Streptomyces species; when the MLSA distance value was between 0.008 and 0.014 (not included), the dDDH or ANIm value between a new strain and a reference strain must be calculated in order to determine the taxonomic status of a novel strain. In this context, a 70% dDDH or 96.7% ANIm value could act as the threshold value in delineating Streptomyces species, but if the dDDH or ANIm value was less than but close to 70 or 96.7% cut-off point, the taxonomic status of a novel strain could only be determined by a combination of phenotypic characteristics, chemotaxonomic characteristics and phylogenomic analysis.Entities:
Keywords: ANIm; MLSA; Streptomyces; dDDH; new insights
Year: 2022 PMID: 35711787 PMCID: PMC9195134 DOI: 10.3389/fmicb.2022.910277
Source DB: PubMed Journal: Front Microbiol ISSN: 1664-302X Impact factor: 6.064
ANIm, MLSA, and dDDH values among 78 pairs of type Streptomyces species including heterotypic synonyms.
| No. | Species 1 | Species 2 | ANIm | MLSA | dDDH |
| 1 | 99.99 | 0.000 | 99.8 | ||
| 2 | 99.95 | 0.000 | 99.7 | ||
| 3 | 99.48 | 0.001 | 95.3 | ||
| 4 | 99.19 | 0.002 | 92.8 | ||
| 5 | 99.20 | 0.002 | 92.8 | ||
| 6 | 99.16 | 0.001 | 92.9 | ||
| 7 | 99.23 | 0.002 | 93.6 | ||
| 8 | 98.97 | 0.001 | 91.2 | ||
| 9 | 99.01 | 0.002 | 91.4 | ||
| 10 | 98.94 | 0.000 | 90.1 | ||
| 11 | 98.83 | 0.002 | 89.8 | ||
| 12 | 98.75 | 0.003 | 88.6 | ||
| 13 | 98.63 | 0.001 | 87.6 | ||
| 14 | 98.62 | 0.002 | 87.5 | ||
| 15 | 97.95 | 0.008 | 80.9 | ||
| 16 | 97.74 | 0.004 | 79.6 | ||
| 17 | 97.78 | 0.008 | 79.4 | ||
| 18 | 97.49 | 0.006 | 76.2 | ||
| 19 | 97.47 | 0.005 | 75.8 | ||
| 20 | 97.41 | 0.009 | 76.0 | ||
| 21 | 97.15 | 0.004 | 74.5 | ||
| 22 | 97.14 | 0.006 | 74.7 | ||
| 23 | 97.08 | 0.005 | 73.9 | ||
| 24 | 96.97 | 0.010 | 72.9 | ||
| 25 | 96.91 | 0.012 | 72.2 | ||
| 26 | 96.90 | 0.010 | 72.0 | ||
| 27 | 96.88 | 0.006 | 71.4 | ||
| 28 | 96.86 | 0.005 | 72.4 | ||
| 29 | 96.86 | 0.011 | 70.9 | ||
| 30 | 96.74 | 0.004 | 70.9 | ||
| 31 | 96.73 | 0.003 | 70.9 | ||
| 32 | 96.69 | 0.007 | 69.5 | ||
| 33 | 96.57 | 0.009 | 68.7 | ||
| 34 | 96.40 | 0.008 | 68.8 | ||
| 35 | 96.23 | 0.011 | 67.0 | ||
| 36 | 95.90 | 0.009 | 64.7 | ||
| 37 | 95.47 | 0.008 | 61.8 | ||
| 38 | 95.27 | 0.014 | 60.6 | ||
| 39 | 95.21 | 0.012 | 59.8 | ||
| 40 | 95.21 | 0.015 | 60.7 | ||
| 41 | 95.20 | 0.019 | 59.7 | ||
| 42 | 95.18 | 0.013 | 60.2 | ||
| 43 | 94.86 | 0.017 | 58.4 | ||
| 44 | 94.75 | 0.016 | 56.2 | ||
| 45 | 94.53 | 0.029 | 56.1 | ||
| 46 | 94.47 | 0.019 | 56.6 | ||
| 47 | 94.44 | 0.009 | 55.4 | ||
| 48 | 94.39 | 0.019 | 55.8 | ||
| 49 | 94.33 | 0.010 | 55.0 | ||
| 50 | 94.24 | 0.014 | 54.5 | ||
| 51 | 93.51 | 0.018 | 50.2 | ||
| 52 | 93.47 | 0.021 | 50.7 | ||
| 53 | 93.34 | 0.027 | 48.1 | ||
| 54 | 93.21 | 0.021 | 48.7 | ||
| 55 | 93.10 | 0.037 | 49.0 | ||
| 56 | 92.95 | 0.020 | 45.1 | ||
| 57 | 92.86 | 0.033 | 47.9 | ||
| 58 | 92.80 | 0.019 | 47.3 | ||
| 59 | 92.75 | 0.031 | 47.6 | ||
| 60 | 92.58 | 0.033 | 45.9 | ||
| 61 | 92.55 | 0.033 | 45.9 | ||
| 62 | 92.48 | 0.018 | 45.7 | ||
| 63 | 92.34 | 0.023 | 45.4 | ||
| 64 | 92.25 | 0.041 | 44.6 | ||
| 65 | 92.09 | 0.033 | 43.5 | ||
| 66 | 92.08 | 0.033 | 43.4 | ||
| 67 | 92.02 | 0.021 | 43.9 | ||
| 68 | 91.57 | 0.042 | 41.6 | ||
| 69 | 91.40 | 0.041 | 42.8 | ||
| 70 | 91.30 | 0.035 | 39.8 | ||
| 71 | 91.12 | 0.033 | 39.7 | ||
| 72 | 90.89 | 0.042 | 39.4 | ||
| 73 | 90.71 | 0.026 | 38.7 | ||
| 74 | 90.52 | 0.050 | 38.8 | ||
| 75 | 90.42 | 0.040 | 38.0 | ||
| 76 | 90.33 | 0.037 | 38.1 | ||
| 77 | 90.20 | 0.039 | 37.0 | ||
| 78 | 90.15 | 0.042 | 37.3 | ||
| 79 | 90.08 | 0.049 | 36.5 | ||
| 80 | 90.00 | 0.050 | 36.6 |
FIGURE 1The correlations between ANIm, dDDH, and MLSA from the 80 pairs of Streptomyces species (including heterotypic synonyms).
FIGURE 2Phylogenomic tree of five pairs of Streptomyces species and related reference strains. The numbers above branches are GBDP pseudo-bootstrap support values > 60% from 100 replications, with an average branch support of 96.0%. The tree was rooted at the midpoint (Farris, 1972).