| Literature DB >> 35185595 |
Taizan Fukaya1,2, Andreas Konrad3, Shigeru Sato1, Ryosuke Kiyono1, Kaoru Yahata1, Koki Yasaka4, Remi Onuma4, Riku Yoshida4, Masatoshi Nakamura1,4.
Abstract
Antagonist contract-relax stretching and contract-relax stretching is commonly used in sports practice and rehabilitation settings. To date, no study has compared these modalities regarding muscle stiffness and stretch tolerance. This study aimed to investigate the effects of contract-relax and antagonist contract-relax stretching on dorsiflexion range of motion (ROM), stretch tolerance, and shear elastic modulus. Forty healthy participants (24 men and 16 women) took part in the study. Participants were randomly assigned to perform either contract-relax stretching or antagonist contract-relax stretching for 2 min. Outcomes were assessed on ROM, stretch tolerance, and shear elastic modulus before and after stretching. The ROM and stretch tolerance significantly increased after both contract-relax stretching (+ 5.4 ± 5.8°, p < 0.05; + 3.5 ± 8.0 Nm, p < 0.05) and antagonist contract-relax stretching (+ 6.1 ± 4.9°, p < 0.05; + 4.2 ± 6.4 Nm, p < 0.05); however, no significant difference was found between the two groups. Alternatively, the shear elastic modulus significantly decreased after both contract-relax (-31.1 ± 22.6 kPa, p < 0.05) and antagonist contract-relax stretching (-11.1 ± 22.3 kPa, p < 0.05); however, contract-relax stretching (-41.9 ± 19.6%) was more effective than antagonist contract-relax stretching (-12.5 ± 61.6%). The results of this study suggest that contract-relax stretching instead of antagonist contract-relax stretching should be conducted to decrease muscle stiffness. However, either contract-relax or antagonist contract-relax stretching can increase ROM.Entities:
Keywords: antagonist contract-relax stretching; contract-relax stretching; range of motion; shear elastic modulus; stretch tolerance
Year: 2022 PMID: 35185595 PMCID: PMC8854798 DOI: 10.3389/fphys.2021.764792
Source DB: PubMed Journal: Front Physiol ISSN: 1664-042X Impact factor: 4.566
Physical characteristics of the subjects.
| Characteristics | CR stretching groups | ACR stretching groups | |
| Participants (male, female) | 1 | ||
| Age (years) | 21.7 ± 2.5 | 21.7 ± 2.0 | 1 |
| Height (cm) | 166.6 ± 8.7 | 165.9 ± 7.7 | 0.8 |
| Body mass (kg) | 59.7 ± 10.3 | 60.3 ± 8.6 | 0.8 |
| Body mass index (kg/m2) | 21.4 ± 2.1 | 21.9 ± 2.3 | 0.5 |
CR, contract-relax; ACR, agonist contract-relax.
FIGURE 1Experimental set-up for measuring the dorsiflexion range of motion and passive torque.
Acute effects of contract-relax (CR) stretching and antagonist contract-relax (ACR) stretching on dorsiflexion (DF) range of motion (ROM), passive torque at DF ROM, and shear elastic modulus at before (PRE), and after (POST) stretching intervention.
| DF ROM (°) | Passive torque at DF ROM (Nm) | Shear elastic modulus (kPa) | ||||
| CR groups | ACR groups | CR groups | ACR groups | CR groups | ACR groups | |
| PRE | 25.7 ± 7.5 | 24.2 ± 6.5 | 29.7 ± 9.4 | 27.6 ± 10.2 | 23.4 ± 10.8 | 19.5 ± 5.4 |
| POST | 31.1 ± 10.0 | 30.3 ± 8.4 | 33.2 ± 14.1 | 31.9 ± 14.2 | 13.1 ± 6.9 | 15.8 ± 11.7 |
Data are presented as mean ± standard deviation. *p < 0.05 compared with PRE.
FIGURE 2The relative changes in dorsiflexion (DF) range of motion (ROM) (A), passive torque at DF ROM (B), and shear elastic modulus (C) after contract-relax (CR) stretching and antagonist contract-relax (ACR) stretching. The relative changes in DF ROM and passive torque at DF ROM were no significant differences between CR and ACR stretching. The relative change in shear elastic modulus after CR stretching was significantly higher than ACR stretching (p < 0.01). *p < 0.05 compared with CR stretching.
Stretching angle during contract-relax (CR) stretching and antagonist contract-relax (ACR) stretching.
| Number of sets | First set | Second set | Third set | Fourth set |
|
| ||||
| CR group | 24.5 ± 8.1 | 28.4 ± 8.1 | 29.5 ± 8.2 | 30.6 ± 9.3 |
| ACR group | 24.2 ± 5.8 | 28.5 ± 7.2 | 30.2 ± 8.0 | 31.6 ± 8.2 |
Data are presented as mean ± standard deviation.
*p < 0.05 compared with first set,