Literature DB >> 3514898

The effect of retention grooves in acrylic resin teeth on tooth denture-base bond.

H S Cardash, R Liberman, M Helft.   

Abstract

A progressive shear compressive load was applied at an angle to the lingual surface of acrylic resin teeth bonded to denture base acrylic resin. No statistically significant advantage was derived by preparing retention grooves of different shapes in the ridge lap surface of the denture teeth.

Entities:  

Mesh：

Substances：

Year:  1986        PMID： 3514898     DOI： 10.1016/0022-3913(86)90192-7

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  9 in total

1.  Influence of Surface Modifications of Acrylic Resin Teeth on Shear Bond Strength with Denture Base Resin-An Invitro Study.

Authors:  Vallabh Mahadevan; Madhusudan Krishnan; Chitra Shankar Krishnan; N S Azhagarasan; Jayakrishnakumar Sampathkumar; Hariharan Ramasubramanian
Journal:  J Clin Diagn Res       Date:  2015-09-01

2.  Effect of various chemicals on the bond strength of acrylic tooth and denture base -An Invitro comparative study.

Authors:  V Pridhvi Krishna; Averneni Premalatha; P Jithendra Babu; D Srinivasa Raju; M Praveen Kumar; D Bheemalingeswara Rao
Journal:  J Int Oral Health       Date:  2014-02-26

3.  Comparative study of fracture resistance of porcelain in metal ceramic restorations by using different metal coping designs- an in vitro study.

Authors:  Nilesh Bulbule; B K Motwani
Journal:  J Clin Diagn Res       Date:  2014-11-20

4.  The bond between acrylic resin denture teeth and the denture base: recommendations for best practice.

Authors:  D R Radford; A S Juszczyk; R K F Clark
Journal:  Br Dent J       Date:  2014-02       Impact factor: 1.626

5.  Comparative failure load values of acrylic resin denture teeth bonded to three different heat cure denture base resins: An in vitro study.

Authors:  Sumit Singh Phukela; Amit Dua; Mahima Dua; Varun Sehgal; Gaurav Setya; Rupinder Singh Dhall
Journal:  J Int Soc Prev Community Dent       Date:  2016-04

6.  Assessing Tensile Bond Strength Between Denture Teeth and Nano-Zirconia Impregnated PMMA Denture Base.

Authors:  Saleh Zidan; Nikolaos Silikas; Julfikar Haider; Abdulaziz Alhotan; Javad Jahantigh; Julian Yates
Journal:  Int J Nanomedicine       Date:  2020-12-01

7.  Bond Strength of Acrylic Denture Tooth to a Novel Thermo-Polymerized Denture Base Copolymer Containing Cycloaliphatic Comonomer after Mechanical and Thermal Aging.

Authors:  Ranganathan Ajay; Kanagesan Praveena; Krishnan Rajkumar; Ranganathan Krishnaraj; Selvakumar Preethisuganya; Karthigeyan Suma
Journal:  J Pharm Bioallied Sci       Date:  2021-11-10

8.  Effect of the simulated disinfection by microwave energy on the impact strength of the tooth/acrylic resin adhesion.

Authors:  Rafael L X Consani; Marcelo F Mesquita; Marinaldo H Zampieri; Wilson B Mendes; Simonides Consani
Journal:  Open Dent J       Date:  2008-01-22

9.  Comparative evaluation of different mechanical modifications of denture teeth on bond strength between high-impact acrylic resin and denture teeth: An in vitro study.

Authors:  Sumit Singh Phukela; Siddesh Kumar Chintalapudi; Harleen Sachdeva; Rupinder Singh Dhall; Neeraj Sharma; Allama Prabhu
Journal:  J Int Soc Prev Community Dent       Date:  2016 Mar-Apr
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.