Interalar width as a guide in denture tooth selection.

This study was undertaken to determine the relationship of the IAW, measured between at the widest dimension of the alae of the nose, and two other measurements of maxillary anterior teeth. The other measurements, both of which are significant in the selection and arrangement of artificial teeth used in complete dentures, were the ICTW and the ARCD measured from the distal surface of the maxillary canine on one side of the arch to the distal surface of the canine on the opposite side of the arch. No distinction was made between either the sex or the age of the subjects. The mean ICTW of 35.35 mm was 3% greater than the mean IAW of 34.28 mm. The mean ARCD of 44.85 mm was 31% greater than the mean IAW of 34.28 mm. This mean ARCD compares favorably (less than 1 mm difference) with a constructed ARCD of 45.8 mm from a tooth dimension study by Shillingburg et al. The ARCD was 44.85 mm. This measurement had not been made in the previous study examining the relationship of interalar distance to ICTW. When the IAW was plotted against the intercanine cusp tip width, a fairly strong correlation coefficient of 0.413 was exhibited. A weaker but definite correlation coefficient of 0.217 was observed when the interalar width plotted against the circumferential arc distance from distal surface to distal surface of the maxillary canines.