Lung cancer is considered as one of the most serious disease worldwide. The progress of drug carriers based on nonmaterial, which selectively hold chemotherapeutic agents to cancer cells, has become a major focus in biomedical research. This study aimed to evaluate the growth inhibition and apoptosis induction of the human lung cancer cells (A-549) by Q-loaded SBA-15 conjugate system. Mesoporous silica nanoparticles (SBA-15) as host materials for transporting therapeutics medicaments were fabricated for targeted drug delivery toward lung cancer. With the objective of increasing bioavailability and aqueous solubility of flavonoids, SBA-15 was successfully loaded with the quercetin (Q)-a major flavonoid and characterized with the help of Fourier-transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The biological investigation on A549 cell line confirmed that the efficacy of Q-SBA-15 is much higher than only Q. Moreover, the apoptotic pathway of synthesized Q-SBA-15 NPs examined that the Q-SBA-15-mediated apoptosis via PI3K/AKT/mTOR signaling pathway. Thus, the newly conjugated Q-SBA-15 system improved the apoptotic fate through caspase-mediated apoptosis via PI3K/AKT/mTOR signaling pathway and hence, it can be potentially employed as an anticancer agent for lung cancer.
Lung cancer is considered as one of the most serious disease worldwide. The progress of drug carriers based on nonmaterial, which selectively hold chemotherapeutic agents to cancer cells, has become a major focus in biomedical research. This study aimed to evaluate the growth inhibition and apoptosis induction of the human lung cancer cells (A-549) by Q-loaded SBA-15 conjugate system. Mesoporous silica nanoparticles (SBA-15) as host materials for transporting therapeutics medicaments were fabricated for targeted drug delivery toward lung cancer. With the objective of increasing bioavailability and aqueous solubility of flavonoids, SBA-15 was successfully loaded with the quercetin (Q)-a major flavonoid and characterized with the help of Fourier-transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The biological investigation on A549 cell line confirmed that the efficacy of Q-SBA-15 is much higher than only Q. Moreover, the apoptotic pathway of synthesized Q-SBA-15 NPs examined that the Q-SBA-15-mediated apoptosis via PI3K/AKT/mTOR signaling pathway. Thus, the newly conjugated Q-SBA-15 system improved the apoptotic fate through caspase-mediated apoptosis via PI3K/AKT/mTOR signaling pathway and hence, it can be potentially employed as an anticancer agent for lung cancer.
Lung cancer has emerged as major cause of oncological death worldwide, with neoplasia being
generally avoidable by weight control, intake of vegetable food, and reduction of alcohol
and tobacco. Owing to the complex molecular biology associated with lung metastases, various
therapeutics approaches have been assumed such as chemotherapy, radiotherapy, and
immunotherapy capable of defeating tumor growth to some extent.[1-4] Among them, majority of lung cancer
treatment requires ionizing radiation (IR) to destroy proliferating cells and exhibits a
crucial role in native control after surgery.[5,6] In the course of radiotherapy, ionizing
radiation damages the cancerous DNA, thereby facilitating tumor cell apoptosis and necrosis
in cancerous tissues.[7,8] Regardless of current
improvements in radiation therapy (RT), there are still certain limitations to its use viz.:
(a) failed to differentiate healthy and infectious tissue, (b) radiation dosage and hence
its therapeutic effects, and (c) intrinsic radiation resistance arises due to incomplete
tumor response or recurrence.[9-11]
Therefore, a new strategy is required to lower these issue laid by association between IR
and photosensitizers that potentiate the radiotherapy outcomes.[12-14] One probable area of development is the
use of biomaterial-based radioprotective agent to combine the effects of RT with other
therapeutic modalities.[3,13,15,16] Literature reports presented that the
antioxidants derived either from exogenous/endogenous sources provide defense system to the
body and neutralize excess reactive oxygen species (ROS) to diminish the injury governed by
IR-induced.[17,18]In this context, natural occurring bioflavonoids have great therapeutic potential against
various cancers as they are involved in a different signaling pathway related to apoptosis
via modulating gene expression.
In particular, Q (3,3,4,5,7-pentahydroxyflavone) is of the special interest for its
diverse biological effects, inhibiting multiple enzymes involved in cell proliferation,
including antiproliferative and apoptotic pathways.[20-22] It can also act as chemoprotective and
radioprotective agent, protecting normal cells from the side effects, which offers notable
benefits in anticancer treatment.[16,23]
Moreover, it induces mitochondrial mediated both up- and down-regulation of pro-apoptotic
proteins with the release of cytochrome c.[21-25] As an effective ROS scavenger, Q exerts
an antioxidant property which helps in the free radical-scavenging, reducing the level of
ROS and inhibiting lipid peroxidation.[26,27] However, its clinical efficacy is
restricted mainly due to low polar solubility and chemical instability that eventually lead
to insufficient accumulation around cancer cell.[23,28] Thus, alternative schemes based on
multifunctional nanomaterials have been carried out to improve the aqueous solubility of Q
and radiation responses and thereby achieving enhanced RT with reduced
radio-toxicity.[29,30]Mesoporous silica nanoparticulate (MCM-41, MCM-48, and SBA-15) has been familiarized for
the drug delivery purposes and still they are being investigated.[31,32] SBA-15 is one of the common 2D
hexagonally arrayed mesoporous materials which ensures the easy access of drug molecules due
to its biocompatibility and a low cytotoxicity.[32,33] The kinetic release of the drug molecule
can be control by the modulating the pore diameter pore diameter, which directs the
expulsion of from SBA-15.
It is imperative to analyze the biological effects of Q-loaded SBA-15 mesoporous
nanomaterial induce cytotoxicity.Although several studies regarding the encapsulation of quercetin by other nanoparticulate
system have been documented in literature, however cytotoxicity studies of SBA-15
encapsulated Q against lung cancer are scarcely reported. Present investigation aimed to
evaluate the growth inhibition and apoptosis induction of the human lung cancer cells
(A-549) by Q-loaded SBA-15 conjugate system (Figure 1). Furthermore, we determined that the
efficacy of Q-SBA-15 is better than only Q alone. Therefore, we conclude that the coupling
of antioxidant to mesoporous silica nanoparticles as a new carrier that generates lower
oxidative stress and beneficial in term of ROS reduction, cellular viability, and protective
effects mediated apoptosis pathway involved via AKT/PI3K/mTOR axis.
Figure 1.
Diagram showing Q-loaded SBA-15 conjugate system and its mode of action.
Diagram showing Q-loaded SBA-15 conjugate system and its mode of action.
Experimental Section
Chemical and Cell Lines
P123 (Poly (ethylene glycol)-block-poly (propylene glycol)-block-poly (ethylene glycol),
TEOS (tetraethyl orthosilicate) were procured from Sigma Aldrich, United States.Human lung carcinoma (A549) cell line of passage four was acquired from ATCC, United
States. Cell culture media components: trypsin, DMEM, FBS, PSN antibiotic cocktail, and
EDTA were purchased from Gibco (Grand Island, NY, United States). Antibodies were procured
from Santa Cruz Biotechnology, Dallas, Texas, United States and eBioscience, San Diego,
United States. Dyes were bought from Thermo Fisher Scientific, United States.
Synthesis of Mesoporous SBA-15
In this synthesis, the originator used was tetraethyl orthosilicate (TEOS) and the
template used was P123.
The procedure is called sol-gel solution, and the solution is in acidic state.
First step, 10 mL ethanol was added to 62 g TEOS and stirred for 45 min at 25°C.
Second, 10 mL ethanol was mixed with 18 mL HCl. This solution then was mixed with ethanol
(20 mL) and 90 mL distilled water and stirred for 45 min. The mixed solution was then
refluxed for 3 h at temperature of 60°C. Later, the surfactant solution was added drop
wise into TEOS solution and kept on stirring awaiting the solution turned into gel. The
obtained gel was dried at 100°C for an hour and calcined for 5 h before subjected for
characterizations.
Quercetin Loading
SBA-15 particles were added into Q solution and incubated in a shaker at room temperature
overnight. Q molecules could diffuse in solution into the pore channels. The Q-loaded
SBA-15 was removed by centrifugation and rinsed with water to get rid of the redundant Q.
Finally, the resulting particles were dried in vacuo at 60°C after being washed with water
to yield Q-loaded SBA-15. The amount of Q-loaded into SBA-15 was determined by UV–VIS
spectroscopy at 369 nm (λmax = 369 nm)
Characterizations
For TEM analysis, the dispersed ethanolic solution of material was sonicated for 5 min
before placing onto the carbon-coated copper grid. FT-IR spectrum of the Q-SBA-15 prepared
as KBr pellets was performed on a Perkin Elmer IR 783 spectrophotometer in the range of
4000–4400 cm−1.
Cell Culture and MTT Assay
The A549 cells were maintained in DMEM comprising 10% FBS with 1% antibiotic cocktail as
per manufacturer’s protocol. Propagation of the cells takes place in humidified incubator
supplied with 5% CO2 and maintained at 37°C. After confluence (70−75%), cells
were collected in PBS medium with EDTA (.52 mM) and trypsin (.25%) and plated at a
suitable density to allow them to re-equilibrate before the examination.To measure cell viability and proliferation forms, MTT
(4,5-Dimethyl-thiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay was done.
In this assay, the cells were plated in 96 well plates (4 × 103
cells/well) and treated in presence and absence of different concentrations of Q and
Q-SBA-15 for 24 h. After the incubation period of treatment, the cells were incubated with
MTT solution for 4 h. The cells after treatment were incubated with MTT solution for 4 h.
The yellow tetrazolium salt (MTT) decreases in metabolically active cells to form
insoluble purple formazan crystals, which were solubilized by the addition of acidic
isopropanol. The color change was determined spectrophotometrically at 595 nm
via an ELISA reader. The same protocol has been followed for HEK 293.
Each assay was repeated three times and in triplicate for each type of sample, and the
cytotoxicity was evaluated using absorbance values as follows
Quantification of Apoptosis/Necrosis
During this process, properly washed control and treated A549 cells were stained with
propidium iodide (PI) and Annexin V-FITC in agreement with the seller’s guidelines
(Calbiochem, Merck Millipore, Burlington, Massachusetts, United States).
A flow cytometer (BD LSRFortessa, San Jose, CA, United States) was used to detect
the percentages of early and/or late live, apoptotic, and necrotic cells. The observed
data were investigated through the FlowJo software (version 10.0).
Immunofluorescence
Separately, control/treated A549 cells were washed twice for 10 min in PBS (.01 M) and
incubated for 1 h in blocking solution having normal bovine serum (2%) and Triton X-100 (.3%).
After this, the cells were incubated overnight at 4°C with the corresponding
primary antibody (p-AKT, p-PI3K and cytochrome c), followed by washing
and incubation with one-to-one fluorophore-conjugated secondary antibodies
(antimouse/rabbit FITC and PE) for 2 h. Each slide was counterstained with nuclear dye
(DAPI) for 10 min and mounted with the ProLong antifade reagent, which was identified by a
confocal microscope. The dilution of primary and secondary was 1:500 and 1:100,
respectively. Olympus FV10i microscope was used for the experiment. The data was analyzed
by FluoView software.
Measurement of Caspase-9 Activity
Commercially available caspase-9 colorimetric assay kit (BioVision Research Products,
Mountain View, CA) was applied to determine the caspase-9 activities as per the
manufacturer’s protocols. Absorbance was recorded at 405 nm by an ELISA reader.
In Vitro Quercetin Release
The in vitro drug release experiments were conducted at different pHs
5.5 and 7.4 with 10 μg/mL of Q-SBA-15 loaded into a dialysis bag; .01 mg of EDTFP-1 was
dispersed in a known amount (1 mL) of PBS of 7.4 and 5.5 solutions, transferred to
dialysis bag, and kept at 37°C. The resulting suspension was immersed into 10 mL of PBS
and pH 5.5 solutions and incubated at 130 r/min for a definite time period (9 h). Five
hundred microliter aliquots were drawn from the above dispersions after 30 min intervals;
this was replaced by equal volume of the fresh PBS solution and pH 5.5 buffer for
retaining the release medium same. Release of Q was studied through the UV
spectrophotometric analysis at 370 nm.
Statistical Analysis
All values were presented as standard error mean (±SEM). Statistical meaning and
differences among the set condition was evaluated through one-way analysis of variance
(ANOVA) test followed by OriginPro 8.0 software. The critical significance level was set
at P < .05.
Result and Discussion
The FT-IR spectrum of calcined Q-SBA-15 sample was recorded on Perkin Elmer IR 783
spectrophotometer (Figure 2). Q
comprises of two benzene rings linked by pyran or pyrone. The spectrum displayed
asymmetric and symmetric stretching vibrations bands at 1085 and 801 cm−1,
respectively, which belong to the Si–O–Si mesoporous silica in Q-SBA-15–conjugated
framework. A weak band around 965 cm−1 represents Si–OH stretching. The band at
1636 cm−1 was credited to the carboxyl group (–C=O) stretching vibration of Q
and a broad envelop near 3451 cm−1 ascribed to the characteristic –OH
stretching vibration due to presence of phenolic group of Q.
Figure 2.
FTIR spectrum of synthesized Q-SBA-15 in the range of
4000–4400 cm−1.
FTIR spectrum of synthesized Q-SBA-15 in the range of
4000–4400 cm−1.High-resolution transmission electron microscopy (HRTEM) images and SAED pattern of
SBA-15 nanoparticles are shown in Figure
3. It is evident from the Figure 3(A) that hexagonally order pore channels of SBA-15 material were
observed under 200 nm scale bar. The pores are observed in Figure 3(B), and the SAED pattern confirmed the
mesoporous structure of SBA-15 (Figure
3(C)). After Q loading, the structure remains same (Figure 4) which revealed that there is no alteration
in the SBA-15 after loading of Q.
Figure 3.
TEM images of synthesized SBA-15 (A). under 200 nm scale bar (B) under 10 nm scale
bar (C). SAED pattern of SBA-15.
Figure 4.
TEM images of synthesized Q-SBA-15 (A). under 500 nm scale bar (B) under 200 nm
scale bar (C) under 50 nm scale bar.
TEM images of synthesized SBA-15 (A). under 200 nm scale bar (B) under 10 nm scale
bar (C). SAED pattern of SBA-15.TEM images of synthesized Q-SBA-15 (A). under 500 nm scale bar (B) under 200 nm
scale bar (C) under 50 nm scale bar.
MTT Assay
The MTT assay was carried out to evaluate the cytotoxicity of the Q and loaded with
SBA-15 (Q-SBA-15) at the varying concentrations (0–20 μg/mL) against A549. The treatment
of Q and Q-SBA-15 was for 24 h. In the event of A549 cell line, the colorimetric data
(Figure 5) showed that after
15 μg/mL of Q-SBA-15 treatment, almost all the cells were dead, whereas in case of Q, the
dose was 25 μg/mL. While in case of Q alone, the data implicated that 30, 50, and 70%
cells were dead at 12.35, 20.09, and 26.82 μg/mL, respectively, after 24 h of treatment.
The cytotoxicity of only SBA-15 was also evaluated, which displays insignificant effect up
to 40 μg/mL of concentration. However, Q-SBA-15 conjugated system exhibited IC30, 50, and
70 doses at 6.29, 9.57, and 16.5 μg/mL, respectively. From this data, we have established
that Q-SBA-15 is more potent (85% of cells death) than only Q (65% of cells death) at the
same concentration 20 μg/mL. We have also checked the cytotoxicity of Q-SBA-15 on HEK-293
cell line; up to 20 μg/mL, there was no such kind of toxicity. So 9.57 μg/mL dose was
selected for further biological experiments.
Figure 5.
(A) MTT assay of Quercetin, Q-SBA-15, (B) only SBA-15 on A549 and (C) Q and
Q-SBA-15 on HEK 293 cell line after 24 h of treatment; Each value represents the
mean ± SE of three experiments, n = 3, (*P < .05,
**P < .01, ***P < .001) compared with the
control.
(A) MTT assay of Quercetin, Q-SBA-15, (B) only SBA-15 on A549 and (C) Q and
Q-SBA-15 on HEK 293 cell line after 24 h of treatment; Each value represents the
mean ± SE of three experiments, n = 3, (*P < .05,
**P < .01, ***P < .001) compared with the
control.
Q-SBA-15 Induced Apoptosis in A549 Cells
It is established that phosphatidylserine (PS), a phospholipid component, translocated in
the cell membrane and externalized during apoptosis process. Annexin-V is a specific
PS-binding protein that can be used to distinguish the apoptotic cells when conjugated
with an exact fluorophore. Interestingly, as shown in Figure 6, the percentage of early and late apoptotic
population increased progressively after 10 μg/mL of Q-SBA-15 treatment in time-dependent
manner (12 and 24 h). With 12 h of Q-SBA-15 treatment, the viable cells were reduced to
44.8% following the enhancement of early/late apoptotic and necrotic population of 45.7,
9.2, and .3%, respectively. After 24 h of treatment, the viable cells decreased to 17.1%
following the early/late apoptotic and necrotic population of 32.8%, 49, and .3%. This
data confirmed that Q-SBA-15 induced cell death is due to apoptosis.
Figure 6.
Annexin V-FITC/PI data after 12 and 24 h of 10 μg/mL Q-SBA-15 treatment against
A549, where Q3, Q4, Q2, and Q1 indicate viable cell, early apoptosis, late
apoptosis, and necrosis, respectively. Q-SBA-15 Dephosphorylated AKT/PI3K/mTOR
pathway in A549 cells.
Annexin V-FITC/PI data after 12 and 24 h of 10 μg/mL Q-SBA-15 treatment against
A549, where Q3, Q4, Q2, and Q1 indicate viable cell, early apoptosis, late
apoptosis, and necrosis, respectively. Q-SBA-15 Dephosphorylated AKT/PI3K/mTOR
pathway in A549 cells.Regulating PI3K/AKT/mTOR pathway in cancer cells acts a key aspect to make cancer cell
viable for cell death during apoptosis. After treatment with 10 μg/mL of Q-SBA-15, the
expression of p-AKT, p-PI3K, and p-mTOR was checked by confocal microscopy. As shown in
Figure 7, it has been clearly
exposed that the expression of p-AKT and p-PI3K has been decreased over the control one,
after treatment of 10 μg/mL of Q-SBA-15 in time-dependent manner, where DAPI is used as
nuclear stainer. As p-AKT down-regulates after treatment of Q-SBA-15, the expression of
p-mTOR and cytochrome c has been analyzed by confocal microscopy (Figure 8). The data has shown that
the enhancement in the expression of p-mTOR and cytochrome c has been
observed in a time-dependent manner. Hence, from the microscopic images, it has been
indicated that the Q-SBA-15–mediated apoptosis occurs via PI3K/AKT/mTOR
signaling pathway.
Figure 7.
Expression of p-AKT and p-PI3K after 12 and 24 h of 10 μg/mL Q-SBA-15 treatment
against A549, DAPI used as nuclear stainer.
Figure 8.
Expression of p-mTOR and cytochrome c after 12 and 24 h of
10 μg/mL Q-SBA-15 treatment against A549, DAPI used as nuclear stainer.
Expression of p-AKT and p-PI3K after 12 and 24 h of 10 μg/mL Q-SBA-15 treatment
against A549, DAPI used as nuclear stainer.Expression of p-mTOR and cytochrome c after 12 and 24 h of
10 μg/mL Q-SBA-15 treatment against A549, DAPI used as nuclear stainer.
Expression of Caspase-9 Activity
In order to corroborate the Q-SBA-15 induced cell death via
PI3K/AKT/mTOR signaling pathway, the caspase-9 assay has been performed with different
time interval. The expression of cytochrome c has been increased after
treatment of Q-SBA-15 with respect to time. The final apoptotic fate was determined by the
activity of caspase-9 (Figure 9),
which was simultaneously enhanced with the treatment of Q-SBA-15 in a time-dependent
manner. Thus, we concluded that Q-SBA-15–mediated apoptosis might be regulated through the
PI3K/AKT/mTOR signaling pathway.
Figure 9.
Expression of caspase-9 after 12 and 24 h of 10 and 20 μg/mL Q-SBA-15 and Q,
respectively. Each value represents the mean ± SE of three experiments, n = 3,
(*P < .05, **P < .01) compared with
control.
Expression of caspase-9 after 12 and 24 h of 10 and 20 μg/mL Q-SBA-15 and Q,
respectively. Each value represents the mean ± SE of three experiments, n = 3,
(*P < .05, **P < .01) compared with
control.In vitro Q release of Q-SBA-15 was evaluated at pH 5.5 and 7.4 as shown
in Figure 10. The data shows
that at acidic pH, the release of Q was found to be much higher at pH 7.4 as we know the
pH of cancer cell is around 5.5. Therefore, we can tell that the apoptosis rate of
Q-SBA-15 is much higher than only Q because of the pH-dependent delivery of Q-SBA-15.
Figure 10.
In vitro time-dependent pharmacokinetics of Q release from
Q-SBA-15 at pH of 5.5 and 7.4.
In vitro time-dependent pharmacokinetics of Q release from
Q-SBA-15 at pH of 5.5 and 7.4.
Conclusion
In this study, Q-loaded Q-SBA-15 NPs were obtained by a multistep process. This study
confirmed that the efficacy of Q-SBA-15 is much higher than only Q. In addition, the
obtained data of apoptotic pathway suggested that the Q-SBA-15–mediated cell death is
caspase-mediated apoptosis via PI3K/AKT/mTOR signaling pathway. Thus,
Q-SBA-15 NPs have a huge prospective to be employed as an anticancer agent to overcome the
epidemiology of lung cancer in future. However, further investigations are needed to be
conducted on different in vitro and in vivo experimental
models.
Authors: Ben Liu; Ting Jiang; Haoquan Zheng; Shanka Dissanayke; Wenqiao Song; Anthony Federico; Steven L Suib; Jie He Journal: Nanoscale Date: 2017-05-18 Impact factor: 7.790
Authors: Arif Ali; Snehasis Mishra; Saima Kamaal; Abdullah Alarifi; Mohd Afzal; Krishna Das Saha; Musheer Ahmad Journal: Bioorg Chem Date: 2020-11-21 Impact factor: 5.275
Authors: Siyu Shi; Ravi Vissapragada; Joseph Abi Jaoude; Caroline Huang; Anmol Mittal; Elisa Liu; Jim Zhong; Vivek Kumar Journal: Bioact Mater Date: 2020-02-21