| Literature DB >> 35012624 |
Jon-Émile S Kenny1,2, Igor Barjaktarevic3, David C Mackenzie4,5, Mai Elfarnawany6, Zhen Yang6, Andrew M Eibl7,6, Joseph K Eibl7,6,8, Chul-Ho Kim9, Bruce D Johnson9.
Abstract
OBJECTIVE: Doppler ultrasonography of the common carotid artery is used to infer stroke volume change and a wearable Doppler ultrasound has been designed to improve this workflow. Previously, in a human model of hemorrhage and resuscitation comprising approximately 50,000 cardiac cycles, we found a strong, linear correlation between changing stroke volume, and measures from the carotid Doppler signal, however, optimal Doppler thresholds for detecting a 10% stroke volume change were not reported. In this Research Note, we present these thresholds, their sensitivities, specificities and areas under their receiver operator curves (AUROC).Entities:
Keywords: Carotid Doppler; Corrected flow time; Stroke volume; Velocity time integral
Mesh:
Year: 2022 PMID: 35012624 PMCID: PMC8750810 DOI: 10.1186/s13104-021-05896-y
Source DB: PubMed Journal: BMC Res Notes ISSN: 1756-0500
Fig. 1Picture of wireless, wearable Doppler ultrasound device
Fig. 2Hemodynamic data captured during lower body negative pressure (LBNP) and release. Measures from A–D are synchronously captured. Each faint line represents a single protocol, while the emboldened line represents the average of all protocols. A Stroke volume (SV) percent change during progressively severe LBNP (i.e., hemorrhage model) and release of LBNP (i.e., rapid transfusion model). B Mean arterial pressure (MAP) percent change. C velocity time integral (VTI) from the wearable Doppler percent change. D corrected flow time (ccFT) percent change. E The optimal carotid artery maximum VTI threshold for distinguishing ≥ + 10% SV∆. Each data point represents a 10-s average. Prior to subsampling, there were 3596 data points categorized as < + 10% SV∆ and 598 data points categorized as ≥ + 10% SV∆. The data categorized as < + 10% SV∆ were randomly subsampled, iteratively 1000 times, to 598 data points (see methods). The sensitivity of maximum VTI is 532/598 = 89% and specificity is 598/598 = 100%. F The optimal ccFT threshold for distinguishing + 10% SV∆. Each data point represents a 10-s average. The sensitivity is 532/598 = 89% and specificity is 598/598 = 100%