Non-enzymatic nitrite amperometric sensor fabricated with near-spherical ZnO nanomaterial.

A unique near-spherical ZnO nanostructure was synthesized by using mixed solvents composed of polyethylene glycol-400 (PEG-400) and water at the volume ratio of 12:1 via the solvo-thermal method, and it possessed an ideal morphology with higher uniformity, better dispersion and small particle size. Such ZnO was employed to modify glass carbon electrode (GCE) for the construction of electrochemical sensor, i.e. near-spherical ZnO/GCE, whose nitrite sensing performance was evaluated by Chronoamperometry (CA) and Linear Sweep Voltammetry (LSV). In order to emphasis the superior sensing property and extensive suitability for different electrochemical detection techniques, the excellent but not the same nitrite detection performance obtained from CA and LSV was individually given in detail. This sensor based on CA showed broad linearity range of 0.6 μM-0.22 mM and 0.46 mM-5.5 mM, improved sensitivity of 0.785 μA μM-1 cm-2 accompanied with low LOD of 0.39 μM. With regard to LSV, wide linearity response of 1.9 μM-0.8 mM and 1.08 mM-5.9 mM, high sensitivity of 0.646 μA μM-1 cm-2 with LOD of 0.89 μM were obtained. Meanwhile, this sensor displayed outstanding repeatability with RSD of 2.96% (n = 4), high reproducibility with low RSD (1.72%-2.35%, n = 4), strong selectivity towards nitrite with the concentration set at one-tenth of the interfering substances, ideal stability with the peak current intensity above 90% of its initial value after storage for one month and acceptable recovery of 1.72-2.35% to actual samples including ham sausage, pickle and tap water. The near-spherical ZnO nanomaterial may be a preferred candidate for the fabrication of nitrite electrochemical sensor, which may exhibit a fascinating application in terms of food analysis and environmental monitoring.