| Literature DB >> 34926613 |
Yuxuan Zhang1, Xinyi Zhang1, Qichao Dong1, Delong Chen1, Yi Xu2, Jun Jiang1.
Abstract
The drug-coated balloon (DCB) is an emerging percutaneous coronary intervention (PCI) device with theoretical advantages and promising results. Recent clinical observations have demonstrated that DCB tends to have both good efficacy and a good safety profile in the treatment of in-stent restenosis (ISR) for both bare-metal and drug-eluting stents (DES), de novo coronary artery disease (CAD), and other situation, such as high bleeding risk, chronic total occlusion, and acute coronary syndrome (ACS). Dual antiplatelet therapy (DAPT) has become an essential medication in daily clinical practice, but the optimal duration of DAPT after the implantation of a DCB remains unknown. At the time of the first in vivo implantation of paclitaxel-DCB for the treatment of ISR in 2006, the protocol-defined DAPT duration was only 1 month. Subsequently, DAPT duration ranging from 1 to 12 months has been recommended by various trials. However, there have been no randomized controlled trials (RCTs) on the optimal duration of DAPT after DCB angioplasty. Current clinical guidelines normally recommend the duration of DAPT after DCB-only angioplasty based on data from RCTs on the optimal duration of DAPT after stenting. In this review, we summarized current clinical trials on DCB-only angioplasty for different types of CADs and their stipulated durations of DAPT, and compared their clinical results such as restenosis, target lesion revascularization (TLR) and stent thrombosis event. We hope this review can assist clinicians in making reasonable decisions about the duration of DAPT after DCB implantation.Entities:
Keywords: de novo coronary artery disease; drug-coated balloon; dual antiplatelet therapy; in-stent restenosis; percutaneous coronary intervention
Year: 2021 PMID: 34926613 PMCID: PMC8671702 DOI: 10.3389/fcvm.2021.762391
Source DB: PubMed Journal: Front Cardiovasc Med ISSN: 2297-055X
Major current drug-coated balloon available in the market (4).
|
|
|
|
|
|
|
|---|---|---|---|---|---|
| SeQuent please | B. Braun Melsungen AG, Berlin, Germany | Paclitaxel | 3 μg/mm2 | Matrix coating: paclitaxel + hydrophilic spacer (iopromide) | Inflate for at least 40 s to allow enough drug to be released into the vessel wall (4.5% of the drug remains on the balloon) |
| DIOR-II | Eurocor GmbH, Bonn, Germany | Paclitaxel | 3 μg/mm2 | 1:1 mixture of aleuritic and shellolic acid with paclitaxel (shellac® coating) | Drug delivery by simple diffusion, inflate 20–30 s at normal pressure |
| Elutax | Aachen Resonance GmbH, Aachen, Germany | Paclitaxel | 2 μg/mm2 | Two layers of paclitaxel (the first on the inflated balloon and the second as a crystal power), without any excipient | 10% of the drug remains on the balloon after an inflation of 30–60 s |
| RESTORE DCB | Cardionovum, Bonn, Germany | Paclitaxel | 3 μg/mm2 | Shellac | A short-term balloon-to-vessel wall contact time of 45 s is enough |
| Pantera Lux | Biotronik, Bulach, Switzerland | Paclitaxel | 3 μg/mm2 | Paclitaxel + butyryl-trihexyl citrate | Minimum inflation time is 30 s to allow enough drug to be released into the vessel wall |
| Danubio | Minvasys, Gennevilliers, France | Paclitaxel | 2.5 μg/mm2 | Paclitaxel + butyryl-trihexyl citrate | Minimum inflation time is 30 s to allow enough drug to be released into the vessel wall |
| Protégé and Protégé NC | Blue Medical, Helmond, Netherlands | Paclitaxel | 3 μg/mm2 | Drug component encapsulated in wings using Wing Seal Technology | Load secured to achieve the therapeutic window within 30 s inflation time, also available with non-compliant balloon |
| MagicTouch | Concept Medical, Surat, India | Sirolimus | 1.27 μg/mm2 | Sirolimus is encapsulated in a phospholipid bi-layer as drug carrier and in Nanocarriers configuration | Inflate for at least 45 s if clinically tolerated |
| IN.PACT Falcon | Medtronic, Inc., Santa Rosa, California, USA | Paclitaxel | 3 μg/mm2 | Crystalline coating: paclitaxel + urea (FreePac®) | Inflate 30–60 s at normal pressure to allow enough drug release into the vessel wall (4.7% of the drug remains on the balloon) |
| Agent | Boston Scientific, Natick, MA, USA | Paclitaxel | 2 μg/mm2 | Balanced hydrophobic and hydrophilic properties of TransPax, Fewer particulates are lost distally during the procedure | Inflate for at least 30 s to allow enough drug to be released into the vessel wall |
| AngiosculptX | Spectranetics, Colorado Springs, Colorado, USA | Paclitaxel | 3 μg/mm2 | Nordihydroguaiaretic acid excipient to facilitate drug transfer to tissue | Inflate for at least 30 s, Improved dilatation in calcified or resistant lesion using a scoring balloon |
| Chocolate touch | QT Vascular | Paclitaxel | 3 μg/mm2 | Crystalline paclitaxel coating with hydrophilic excipient | The pillows and grooves of the inflated Chocolate Touch balloon result in 20% more drug-coated surface compared to conventional balloons of the same size |
| Essential | Ivascular | Paclitaxel | 3 μg/mm2 | Microcrystalline coating | Inflation process must last from 30 s to 1 min |
Figure 1The role of platelet activation. At the site of vascular injury, platelet adherence to the endothelium through the combination of glycoprotein (GP) receptors with exposed extracellular matrix proteins (particularly collagen and von Willebrand factor, vWF). Platelet activation occurs through complex intracellular signaling processes and leads to the release of various agonists, including thromboxane A2 (TXA2), ADP, and 5-hydroxytryptamine (5-HT), which act by binding to their respective G protein-coupled receptors and mediate paracrine and autocrine platelet activation. The receptor P2Y purinoceptor 12 (P2Y12) has a major role in the amplification of platelet activation, which is also supported by outside-in signaling via αIIbβ3 integrin (the glycoprotein IIb/IIIa receptor). The main platelet integrin GPIIb/IIIa mediates platelet aggregation through conformational shape changes and binding to fibrinogen and vWF, thereby mediating the final common step of platelet activation. The net result of these interactions is thrombus formation mediated by the interaction of platelet aggregate with fibrin and thrombin. The available drugs (gray boxes) blockade different pathways of platelet activation and show additive inhibitory effects when used in combination. PAR, proteinase-activated receptor; TPα, TXA2 receptor isoform-α; COX1, cyclooxygenase 1. Adapted from Varga-Szabo et al. (14).
Characteristics of randomized trials of DCB for treatment of ISR.
|
|
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|---|
|
| |||||||
| PACCOCATH ISR (2006) ( | 52 | DCB vs. POBA | 1 in both groups | LLL: 0.03 ± 0.48 mm vs. 0.74 ± 0.86 mm | 5 vs. 43% | 0 vs. 23% | 0 vs. 0 (12) |
| PEPCAD II isr (2009) ( | 131 | DCB vs. PES | 3 in DCB vs. 6 in PES | LLL: 0.17 ± 0.42 mm vs. 0.38 ± 0.61 mm (6) | 7 vs. 20% | 6.3 vs. 15.4% (36) | 0 vs. 0 (36) |
| ribs V (2014) ( | 189 | DCB vs. EES | 3 in DCB vs. 12 in EES | MLD: 2.01 ± 0.6 mm vs. 2.36 ± 0.6 mm | 9.5 vs. 4.7% | 6 vs. 1% (12) 8 vs. 2% | 1 vs. 0 (36) |
| PATENE-C (2016) ( | 61 | PCSB vs. USB | 3 in both | LLL: 0.17 ± 0.40 mm vs. 0.48 ± 0.51 mm | 7 vs. 41% | 3 vs. 32% | 0 vs. 0 (12) |
| Pleva et al. (2016) ( | 136 | DCB vs. EES | 3 in DCB vs. 6-12 in EES | LLL: 0.09 ± 0.73 mm vs. 0.44 ± 0.73 mm | 8.7 vs. 19.12% | 7.35 vs. 16.18% (12) | 1 VS. 0 (12) |
|
| |||||||
| PEPCAD-DES (2012) ( | 110 | DCB vs. POBA | 6 in both groups | LLL: 0.43 ± 0.61 mm vs. 1.03 ± 0.77 mm | 17.2 vs. 58.1% | 15.3 vs. 36.6% | 1 vs. 4 |
| ISAR-DESIRE 3(2013) ( | 402 | DCB vs. PES vs. POBA | 6 in all groups | DS: 38.0% in DCB vs. 37.4% in PES vs. 54.1% in POBA (6–8) | NA | 22.1% in DCB vs. 13.5% in PES vs. 43.5% in POBA (12) 33.3% in DCB vs. 24.2% in PES vs. 50.8% in POBA (36) | 1 vs. 1 vs. 0 (12) 1 vs. 2 vs. 0 (36) |
| Pepcad China ISR (2014) ( | 220 | DCB vs. PES | 12 in both groups | LLL: 0.46 ± 0.51 mm vs. 0.55 ± 0.61 mm (9) | 18.6 vs. 23.8% | 15.6 vs. 12.3% (12) 15.9 vs. 13.7% (24) | 1 vs. 2 (12) 1 vs. 3 (24) |
| Ribs IV (2015) ( | 309 | DCB vs. EES | 3 in DCB vs. 12 in EES | MLD: 1.80 ± 0.6 mm vs. 2.03 ± 0.7 mm | 19 vs. 11% | 13.0 vs. 4.5% | 3 vs. 2 (12) 4 vs. 2 (36) |
| ISAR-DESIRE 4 (2017) ( | 252 | DCB vs. SB-DCB | 6 in both groups | DS: 40.4 ± 21.4 vs. 35 ± 16.8% | 32.0 vs. 18.5% | 21.8 vs. 16.2% (12) | 0 vs. 0 (12) |
| Restore (2018) ( | 172 | DCB vs. EES | 6 in both groups | LLL: 0.15 ± 0.49 mm vs. 0.19 ± 0.41 mm (9) | 19.5 vs. 5.6% | 5.8 vs. 1.2% (12) | 0 vs. 0 (12) |
|
| |||||||
| DARE (2018) ( | 278 | DCB vs. EES | 12 in both groups | MLD: 1.71 ± 0.51 vs. 1.74 ± 0.61 (6) | 18.1 vs. 20.9% | 8.8 vs. 7.1% (12) | 0 vs. 0 (12) |
| Blolux (2018) ( | 229 | DCB vs. SES | Given as per local standard | LLL: 0.03 ± 0.40 mm vs. 0.20 ± 0.70 (6) | NA | 13.5 vs. 11.6% (18) | 1 vs. 2 (18) |
DAPT, dual anti-platelet therapy; TLR, target lesion revascularization; ST, stent thrombosis including definite and possible; DCB, drug-coated balloon; POBA, plain old balloon angioplasty; LLL, late lumen loss; PES, paclitaxel-eluting stent; EES, everolimus-eluting stent; MLD, minimal lumen diameter; PCSB, paclitaxel-coated scoring balloon; USB, uncoated scoring balloon; DS, diameter restenosis; SB-DCB, scoring balloon before drug-coated balloon; SES, sirolimus-eluting stent.
P < 0.01 vs. non-DCB group.
P < 0.05 vs. non-DCB group.
Characteristics of randomized control trials of DCB for treatment of small vessel de novo coronary artery disease.
|
|
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|---|
| PICCOLETO (2010) ( | 57 | DCB vs. DES | 1 in SAP and alone DCB use vs. 3 in DCB + stent implantation vs. 12 in UAP or DES | DS: 43.6 vs. 24.3% | 32.1 vs. 10.3% | 32.1 vs. 10.3% (9) | 0 vs. 0 (9) |
| Bello (2012) ( | 182 | DCB vs. PES | 1 in DCB only vs. 3 in DCB + BMS vs. 12 in PES | LLL: 0.08 ± 0.38 mm vs. 0.29 ± 0.44 mm | 8.9 vs. 14.1% | 4.4 vs. 7.6% (6) 6.7 vs. 13% (36) | 0 vs. 0 (36) |
| Funatsu et al. (2017) ( | 135 | DCB vs. POBA | 3 in both groups | TVF: 3.4 vs. 10.3% (6) | 13.3 vs. 42.5% | 2.3 vs. 10.3% (6) | 0 vs. 0 (6) |
| BASKET-SMALL 2 (2018) ( | 758 | DCB vs. nDES | 1 in SAP and DCB only vs. 6 in SAP and DES vs. 12 in ACS vs. 3 in DCB + BMS vs. 6 in DCB + DES | MACE: 7.3 vs. 7.5% (12) MACE: 15 vs. 15% (36) | NA | 3.4 vs. 4.5% (12) 9 vs. 9% (36) | 2 vs. 4 ( |
| Angiographic analysis from the BASKET-SMALL 2 (2020) ( | 111 | ditto | ditto | DS: 35.8 vs. 29.0% | 20.4 vs. 21.5% | NA | NA |
| Restore SVD China (2018) ( | 230 | DCB vs. nDES | At least 6 in both groups | DS: 29.6 ± 2.0 vs. 24.1 ± 2.0% (9) | 11.0 vs. 8.6% | 4.4 vs. 2.6% (12) 5.2 vs. 2.8% (24) | 0 vs. 0 (24) |
| PICCOLETO II (2020) ( | 232 | DCB vs. EES | 1 in SAP and DCB vs. 6 in EES vs. 12 in ACS | LLL: 0.04 ± 0.28 mm vs. 0.17 ± 0.39 mm | 6.3 vs. 6.5% | 5.6 vs. 5.6% (12) | 0 vs. 2 (12) |
DAPT, dual anti-platelet therapy; TLR, target lesion revascularization; ST, stent thrombosis including definite and possible; DCB, drug-coated balloon; DES, drug-eluting stent; SAP, stable angina pectoris; UAP, unstable angina pectoris; DS, diameter restenosis; PES, paclitaxel-eluting stent; BMS, bare-metal stent; POBA, plain old balloon angioplasty; TVF, target vessel failure; nDES, new-generation drug-eluting stent; ACS, acute coronary syndrome; MACE, major adverse cardiac events; EES, everolimus-eluting stent.
P < 0.01 vs. non-DCB group.
P < 0.05 vs. non-DCB group.
Characteristics of prospective trials of DCB for treatment of de novo coronary artery disease including large vessels.
|
|
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|---|
|
| |||||||
| Nishiyama et al. (2016) ( | 60 | DCB vs. EES | 8 in both groups | 2.88 ± 0.57 mm vs. 2.72 ± 0.64 mm | LLL: 0.25 ± 0.25 mm vs. 0.37 ± 0.40 mm (8) | 0.0 vs. 6.1% (8) | NA |
| Gobić et al. (2017) ( | 75 | DCB vs. SES | 12 in both groups | 2.61 ± 0.49 mm vs. 3.04 ± 0.46 mm | LLL: −0.09 ± 0.08 mm vs. 0.10 ± 0.19 mm | 0.0 vs. 5.4% (6) | 0 vs. 2 (6) |
| REVELATION (2019) ( | 120 | DCB vs. DES | 9 in both groups | 3.28 ± 0.52 mm vs. 3.20 ± 0.48 mm | FFR: 0.92 ± 0.05 vs. 0.91 ± 0.06 (9) | 3 vs. 2% (9) | 1 vs. 0 (9) |
| DEBUT (2019) ( | 220 | DCB vs. BMS | 1 in both groups | NA | MACE: 1 vs. 14% | 0 vs. 6% | 0 vs. 2 (12) |
|
| |||||||
| Cortese et al. (2015) ( | 156 | DCB | 1 in DCB only vs. 6 in DCB and stent implantation | 2.83 (2.12–3.01) mm | Complete vessel healing rate: 93.8% (6) | 6.2% in dissection cohort vs. 5.3% in ALL DCB | NA |
| Shin et al. (2016) ( | 66 | DCB vs. nDES | 1.5 in DCB vs. 12 in DES vs. 6 in BMS | 2.69 ± 0.45 mm vs. 2.92 ± 0.31 mm | LLL: 0.05 ± 0.27 mm vs. 0.40 ± 0.54 mm | 0.0 vs. 4.5% (12) | 0 vs. 0 (12) |
| Ann et al. (2016) ( | 27 | DCB | 1.5 | 2.58 ± 0.45 mm | LLL: 0.02 ± 0.27 mm (9) | 0.0% (9) | NA |
| Lu et al. (2019) ( | 92 | DCB | 6 | 3.32 ± 0.46 | LLL: −0.02 ± 0.49 mm (9) | 4.3% (12) | NA |
| Rosenberg et al. (2019) ( | 686 | DCB | 1 in DCB vs. 6 in DCB + stent implantation | 2.31 ± 0.26 mm in small vessels vs. 3.16 ± 0.26 mm in large vessels | TLR: 2.4% in small vessels vs. 1.8% in large vessels (9) | TLR: 2.4% in small vessels vs. 1.8% in large vessels (9) | 1 in small vessels vs. 1 in large vessels (9) |
DAPT, dual anti-platelet therapy; RVD, reference vessel diameter; TLR, target lesion revascularization; ST, stent thrombosis including definite and possible; DCB, drug-coated balloon; EES, everolimus-eluting stent; LLL, late lumen loss; DES, drug-eluting stent; FFR, fractional flow reserve; SES, sirolimus-eluting stent; BMS, bare-metal stent; MACE, major adverse cardiac events.
P < 0.01 vs. non-DCB group.
P < 0.05 vs. non-DCB group.
Figure 2Algorithm for dual antiplatelet therapy (DAPT) in patients treated with percutaneous coronary intervention and only using DCB. DCB, drug-coated balloon; ISR, in-stent restenosis; CTO, chronic total occlusions. High bleeding risk is considered an increased risk of spontaneous bleeding during DAPT (e.g., PRECISE-DTPA score ≥25).