Literature DB >> 34846118

Superhydrophobic Silica Aerogels and Their Layer-by-Layer Structure for Thermal Management in Harsh Cold and Hot Environments.

Ling Liu1,2, Xiameng Shan2, Xueyan Hu1,2, Weibang Lv2, Jin Wang1,2.   

Abstract

Personal thermal management (PTM) materials have recently received considerable attention to improve human body thermal comfort with potentially reduced energy consumption. Strategies include passive radiative cooling and warming. However, challenges remain for passive thermal regulation of one material or structure in both harsh hot and cold environments. In this work, silica aerogels derived from sodium silicate were prepared through a solvent-boiling strategy, where hydrophobization, solvent exchange, sodium purification, and ambient pressure drying (HSSA) proceeded successively and spontaneously in a one-pot process. This strategy leads to the synthesis of superhydrophobic silica aerogels with extremely low energy consumption without out the use of an ion-exchange resin or low surface tension solvents. Silica aerogels possess a high specific surface area (635 m2/g), high contact angle (153°), and low thermal conductivity (0.049 W/m K). A layer-by-layer (LBL) structure including the silica aerogel layer and an extra phase change material layer was designed. The structure demonstrates dual-functional thermal regulation performance in both harsh cold (-30 °C) and hot (70 °C) environments, where the time to reach equilibrium is postponed, and the inner temperature of the LBL structure can be kept above 20 °C in harsh cold environments (-30 °C) and below 31 °C in harsh hot environments (70 °C). A proof-of-concept experimental setup to simulate the illumination of sunlight also proved that the inside temperature of a model car protected by the LBL structure was below 28 °C, while the outside temperature was 70 °C. In addition, these results are well supported by theoretical COMSOL simulation results. The findings of this work not only provide an eco-friendly approach to synthesize silica aerogels but also demonstrate that the LBL structure is a robust dual-functional PTM system for thermal regulation in both harsh hot and cold environments.

Entities:  

Keywords:  aerogel; harsh environment; microenvironment; personal thermal management; phase change materials

Year:  2021        PMID: 34846118     DOI: 10.1021/acsnano.1c07184

Source DB:  PubMed          Journal:  ACS Nano        ISSN: 1936-0851            Impact factor:   15.881


  2 in total

1.  Aerogel-Functionalized Thermoplastic Polyurethane as Waterproof, Breathable Freestanding Films and Coatings for Passive Daytime Radiative Cooling.

Authors:  Xiameng Shan; Ling Liu; Yusi Wu; Dengsen Yuan; Jing Wang; Chengjiao Zhang; Jin Wang
Journal:  Adv Sci (Weinh)       Date:  2022-04-27       Impact factor: 17.521

2.  Thermal Insulation Performance of SiC-Doped Silica Aerogels under Large Temperature and Air Pressure Differences.

Authors:  Sheng-Nan Zhang; Hao-Qiang Pang; Ting-Hui Fan; Qing Ye; Qi-Lin Cai; Xi Wu
Journal:  Gels       Date:  2022-05-20
  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.