Improving Process Understanding in Roll Compaction.

Roll compaction/ dry granulation is gaining importance. Numerous papers have been published and many attempts to model the process are available in the meantime. Johanson published a model in 1965, which is the basis for many further modifications until today. The aim of the paper is to improve process understanding in roll compaction, which can be used to setup a roll compaction process, to design a scale-up strategy or to help in process transfer between different types of roll compactors. Based on some assumptions, simple considerations help to estimate a required densification factor and to visualize the relations between roll diameter, gap width and nip angle. Two recently published papers based on simplified Johansen models are used to visualize the relations between specific compaction force and the maximal pressure experienced by the material. The influence of roll diameter, gap width and compressibility constant are discussed. This helps to estimate, if a scale-up or process transfer is reasonable. The recently introduced dimensionless Midoux-number can also be used to design scale-up or process transfer of roll compaction without knowledge about the maximal pressure. Exploring the simple concepts can help to improve process understanding even without a background in engineering.