Michael Decker1, Amber Price1, Aria Khalili2, Robert Klassen2, Mary Jane Walzak3, Matthew Teeter4,5,6,7, Richard McCalden8, Brent Lanting8. 1. Department of Orthopaedic Surgery, The University of New Mexico Health Sciences Center, University of New Mexico, Albuquerque, NM, USA. 2. Department of Mechanical and Materials Engineering, Western University, London, Ontario, Canada. 3. Surface Science Western, University of Western Ontario, London, Ontario, Canada. 4. Department of Medical Biophysics, Schulich School of Medicine and Dentistry. 5. Imaging Research Laboratories, Robarts Research Institute, Schulich School of Medicine and Dentistry. 6. Surgical Innovation Program, Lawson Health Research Institute. 7. Division of Orthopaedic Surgery, Schulich School of Medicine and Dentistry, Western University and London Health Sciences Centre, London, Ontario, Canada. 8. Division of Orthopaedic Surgery, London Health Sciences Centre, University Hospital, London, Ontario, Canada.
Abstract
INTRODUCTION: Numerous thermal free radical stabilization techniques are used in the production of highly cross-linked polyethylene (HXLPE) to improve oxidative stability. Little knowledge exists on the effects of in vivo time on the mechanical properties of HXLPE. The purpose of this study was to determine if free radical stabilization of HXLPE impacts mechanical properties as well as oxidative stability of acetabular liner rims after extended in vivo time. METHODS: Retrieved and control remelted, single annealed and sequentially annealed HXLPE liner rims were tested for mechanical properties. Oxidation was measured with FTIR spectroscopy and crystalline phase composition measured with Raman spectroscopy. RESULTS: No correlation was found between in vivo, ex vivo time and hardness for annealed groups. A statistically significant difference in hardness was identified between free radical stabilization groups. No correlation between maximum rim oxidation and in vivo time was found. Detectable levels of rim oxidation were present in 100% of single annealed, 75% of sequentially annealed, and 25% of remelted retrieved liners. Single and sequentially annealed liners demonstrated oxidation and increased crystallinity. Rim mechanical properties change in vivo for implant types. With in vivo time, retrieved remelted HXLPE demonstrated decreased mechanical properties, whereas retrieved single and sequentially annealed HXLPE properties remained stable. All liner cohorts demonstrated evidence of rim oxidation. Subsequent changes in crystallinity were only observed in oxidized annealed liners. CONCLUSION: HXLPE acetabular liner rims show evidence of in vivo mechanical property degradation, notably in remelted HXLPE, which may be a risk factor in rim fracture and catastrophic implant failure.
INTRODUCTION: Numerous thermal free radical stabilization techniques are used in the production of highly cross-linked polyethylene (HXLPE) to improve oxidative stability. Little knowledge exists on the effects of in vivo time on the mechanical properties of HXLPE. The purpose of this study was to determine if free radical stabilization of HXLPE impacts mechanical properties as well as oxidative stability of acetabular liner rims after extended in vivo time. METHODS: Retrieved and control remelted, single annealed and sequentially annealed HXLPE liner rims were tested for mechanical properties. Oxidation was measured with FTIR spectroscopy and crystalline phase composition measured with Raman spectroscopy. RESULTS: No correlation was found between in vivo, ex vivo time and hardness for annealed groups. A statistically significant difference in hardness was identified between free radical stabilization groups. No correlation between maximum rim oxidation and in vivo time was found. Detectable levels of rim oxidation were present in 100% of single annealed, 75% of sequentially annealed, and 25% of remelted retrieved liners. Single and sequentially annealed liners demonstrated oxidation and increased crystallinity. Rim mechanical properties change in vivo for implant types. With in vivo time, retrieved remelted HXLPE demonstrated decreased mechanical properties, whereas retrieved single and sequentially annealed HXLPE properties remained stable. All liner cohorts demonstrated evidence of rim oxidation. Subsequent changes in crystallinity were only observed in oxidized annealed liners. CONCLUSION: HXLPE acetabular liner rims show evidence of in vivo mechanical property degradation, notably in remelted HXLPE, which may be a risk factor in rim fracture and catastrophic implant failure.
Authors: Stephen S Tower; John H Currier; Barbara H Currier; Kimberly A Lyford; Douglas W Van Citters; Michael B Mayor Journal: J Bone Joint Surg Am Date: 2007-10 Impact factor: 5.284
Authors: Ebru Oral; Andrew L Neils; Brinda N Doshi; Jun Fu; Orhun K Muratoglu Journal: J Biomed Mater Res B Appl Biomater Date: 2015-03-12 Impact factor: 3.368
Authors: Siôn Glyn-Jones; Geraint E R Thomas; Patrick Garfjeld-Roberts; Roger Gundle; Adrian Taylor; Peter McLardy-Smith; David W Murray Journal: Clin Orthop Relat Res Date: 2015-02 Impact factor: 4.176
Authors: Steven D Reinitz; Barbara H Currier; Douglas W Van Citters; Rayna A Levine; John P Collier Journal: J Biomed Mater Res B Appl Biomater Date: 2014-06-23 Impact factor: 3.368
Authors: Michael P Ast; Thomas K John; Anthony Labbisiere; Nicolas Robador; Alejandro Gonzalez Della Valle Journal: J Arthroplasty Date: 2013-12-19 Impact factor: 4.757
Authors: Barbara H Currier; John H Currier; Michael B Mayor; Kimberly A Lyford; John P Collier; Douglas W Van Citters Journal: J Bone Joint Surg Am Date: 2007-09 Impact factor: 5.284