Literature DB >> 34372375

Rapid Estimation of Crop Water Stress Index on Tomato Growth.

Kelvin Edom Alordzinu1, Jiuhao Li1, Yubin Lan2, Sadick Amoakohene Appiah1, Alaa Al Aasmi1, Hao Wang1.   

Abstract

The goal of this research is to use a WORKSWELL WIRIS AGRO R INFRARED CAMERA (WWARIC) to assess the crop water stress index (CWSIW) on tomato growth in two soil types. This normalized index (CWSI) can map water stress to prevent drought, mapping yield, and irrigation scheduling. The canopy temperature, air temperature, and vapor pressure deficit were measured and used to calculate the empirical value of the CWSI based on the Idso approach (CWSIIdso). The vegetation water content (VWC) was also measured at each growth stage of tomato growth. The research was conducted as a 2 × 4 factorial experiment arranged in a Completely Randomized Block Design. The treatments imposed were two soil types: sandy loam and silt loam, with four water stress treatment levels at 70-100% FC, 60-70% FC, 50-60% FC, and 40-50% FC on the growth of tomatoes to assess the water stress. The results revealed that CWSIIdso and CWSIW proved a strong correlation in estimating the crop water status at R2 above 0.60 at each growth stage in both soil types. The fruit expansion stage showed the highest correlation at R2 = 0.8363 in sandy loam and R2 = 0.7611 in silt loam. VWC and CWSIW showed a negative relationship with a strong correlation at all the growth stages with R2 values above 0.8 at p < 0.05 in both soil types. Similarly, the CWSIW and yield also showed a negative relationship and a strong correlation with R2 values above 0.95, which indicated that increasing the CWSIW had a negative effect on the yield. However, the total marketable yield ranged from 2.02 to 6.8 kg plant-1 in sandy loam soil and 1.75 to 5.4 kg plant-1 in silty loam soil from a low to high CWSIW. The highest mean marketable yield was obtained in sandy loam soil at 70-100% FC (0.0 < CWSIW ≤ 0.25), while the least-marketable yield was obtained in silty loam soil 40-50% FC (0.75 < CWSIW ≤ 1.0); hence, it is ideal for maintaining the crop water status between 0.0 < CWSIW ≤ 0.25 for the optimum yield. These experimental results proved that the WWARIC effectively assesses the crop water stress index (CWSIW) in tomatoes for mapping the yield and irrigation scheduling.

Entities:  

Keywords:  crop water stress index (CWSI); differential mode; empirical mode; irrigation scheduling; sandy loam and silt loam soils; theoretical mode; tomato; vegetative water content (VWC)

Year:  2021        PMID: 34372375     DOI: 10.3390/s21155142

Source DB:  PubMed          Journal:  Sensors (Basel)        ISSN: 1424-8220            Impact factor:   3.576


  3 in total

1.  Real-Time Assessment of Mandarin Crop Water Stress Index.

Authors:  Sadick Amoakohene Appiah; Jiuhao Li; Yubin Lan; Ransford Opoku Darko; Kelvin Edom Alordzinu; Alaa Al Aasmi; Evans Asenso; Fuseini Issaka; Ebenezer Acheampong Afful; Hao Wang; Songyang Qiao
Journal:  Sensors (Basel)       Date:  2022-05-26       Impact factor: 3.847

2.  Deep Learning Approach for Detection of Underground Natural Gas Micro-Leakage Using Infrared Thermal Images.

Authors:  Kangni Xiong; Jinbao Jiang; Yingyang Pan; Yande Yang; Xuhui Chen; Zijian Yu
Journal:  Sensors (Basel)       Date:  2022-07-16       Impact factor: 3.847

3.  Rapid Estimation of Water Stress in Choy Sum (Brassica chinensis var. parachinensis) Using Integrative Approach.

Authors:  Alaa Al Aasmi; Kelvin Edom Alordzinu; Jiuhao Li; Yubin Lan; Sadick Amoakohene Appiah; Songyang Qiao
Journal:  Sensors (Basel)       Date:  2022-02-22       Impact factor: 3.576

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.