Dimitrios P Sokolis1, Dimitrios C Angouras2. 1. Laboratory of Biomechanics, Center of Clinical, Experimental Surgery, and Translational Research, Biomedical Research Foundation of the Academy of Athens, 11527 Athens, Greece. 2. Department of Cardiac Surgery, Attikon University Hospital, School of Medicine, National and Kapodistrian University of Athens, 12462 Athens, Greece.
Abstract
OBJECTIVES: Ascending thoracic aortic aneurysms (ATAAs) often coexist with dysfunctional tricuspid aortic valves (TAVs). How valvular pathology relates to the aortic wall mechanical properties requires detailed examination. METHODS: Intact-wall and layer-specific mechanical properties from 40 and 21 patients with TAV-ATAAs, respectively, were studied using uniaxial tensile testing, longitudinally and circumferentially. Failure stress (tensile strength), failure stretch (extensibility) and peak elastic modulus (stiffness) measurements, along with histological assays of thickness and elastin/collagen contents, were compared among patients with no valvular pathology (NVP), aortic stenosis (AS) or aortic insufficiency (AI). RESULTS: Intact-wall stiffness longitudinally and medial strength and stiffness, in either direction, were significantly lower in AI patients than in AS and NVP patients. Intact-wall/medial thickness and extensibility in either direction were significantly lower in AS patients than in AI and NVP patients. In contrast, intact-wall/medial stiffness circumferentially was significantly higher in AS patients than in NVP patients, consistent with the significantly increased medial collagen in AS patients. Failure properties and medial thickness and elastin/collagen contents were significantly lower (more impaired) in females. The left lateral was the thickest quadrant in NVP patients, but the 4 quadrants were equally thick in AS and AI patients. There were significant differences in strength and stiffness among quadrants, which varied however in the 3 patient groups. CONCLUSIONS: The aortic wall load-bearing capacity was impaired in patients with ATAA in the presence of TAV stenosis or insufficiency. These findings lend biomechanical support to the current guidelines suggesting lower thresholds for elective ascending aorta replacement in cases of aortic valve surgery.
OBJECTIVES: Ascending thoracic aortic aneurysms (ATAAs) often coexist with dysfunctional tricuspid aortic valves (TAVs). How valvular pathology relates to the aortic wall mechanical properties requires detailed examination. METHODS: Intact-wall and layer-specific mechanical properties from 40 and 21 patients with TAV-ATAAs, respectively, were studied using uniaxial tensile testing, longitudinally and circumferentially. Failure stress (tensile strength), failure stretch (extensibility) and peak elastic modulus (stiffness) measurements, along with histological assays of thickness and elastin/collagen contents, were compared among patients with no valvular pathology (NVP), aortic stenosis (AS) or aortic insufficiency (AI). RESULTS: Intact-wall stiffness longitudinally and medial strength and stiffness, in either direction, were significantly lower in AI patients than in AS and NVP patients. Intact-wall/medial thickness and extensibility in either direction were significantly lower in AS patients than in AI and NVP patients. In contrast, intact-wall/medial stiffness circumferentially was significantly higher in AS patients than in NVP patients, consistent with the significantly increased medial collagen in AS patients. Failure properties and medial thickness and elastin/collagen contents were significantly lower (more impaired) in females. The left lateral was the thickest quadrant in NVP patients, but the 4 quadrants were equally thick in AS and AI patients. There were significant differences in strength and stiffness among quadrants, which varied however in the 3 patient groups. CONCLUSIONS: The aortic wall load-bearing capacity was impaired in patients with ATAA in the presence of TAV stenosis or insufficiency. These findings lend biomechanical support to the current guidelines suggesting lower thresholds for elective ascending aorta replacement in cases of aortic valve surgery.
Authors: Jaroslav Benedik; Kevin Pilarzcyk; Daniel Wendt; Vivien Price; Konstantinos Tsagakis; Mareike Perrey; Hideo A Baba; Heinz Jakob Journal: Eur J Cardiothorac Surg Date: 2013-03-07 Impact factor: 4.191
Authors: Raimund Erbel; Victor Aboyans; Catherine Boileau; Eduardo Bossone; Roberto Di Bartolomeo; Holger Eggebrecht; Arturo Evangelista; Volkmar Falk; Herbert Frank; Oliver Gaemperli; Martin Grabenwöger; Axel Haverich; Bernard Iung; Athanasios John Manolis; Folkert Meijboom; Christoph A Nienaber; Marco Roffi; Hervé Rousseau; Udo Sechtem; Per Anton Sirnes; Regula S von Allmen; Christiaan J M Vrints Journal: Eur Heart J Date: 2014-08-29 Impact factor: 29.983
Authors: William Clifford Roberts; Travis James Vowels; Jong Mi Ko; Giovanni Filardo; Robert Frederick Hebeler; Albert Carl Henry; Gregory John Matter; Baron Lloyd Hamman Journal: Circulation Date: 2011-02-14 Impact factor: 29.690
Authors: Rezar P Deveja; Dimitrios C Iliopoulos; Eleftherios P Kritharis; Dimitrios C Angouras; Dimitrios Sfyris; Stavroula A Papadodima; Dimitrios P Sokolis Journal: Ann Thorac Surg Date: 2018-06-30 Impact factor: 4.330
Authors: Mariusz E Kalinowski; Mariola Szulik; Szymon Pawlak; Barbara Rybus-Kalinowska; Marian Zembala; Zbigniew Kalarus; Tomasz Kukulski Journal: Int J Cardiovasc Imaging Date: 2020-04-17 Impact factor: 2.357
Authors: Ming Hao Guo; Jehangir J Appoo; Richard Saczkowski; Holly N Smith; Maral Ouzounian; Alexander J Gregory; Eric J Herget; Munir Boodhwani Journal: JAMA Netw Open Date: 2018-08-03