Literature DB >> 34299386

Conversion Characteristics of Some Major Cannabinoids from Hemp (Cannabis sativa L.) Raw Materials by New Rapid Simultaneous Analysis Method.

Byeong Ryeol Ryu1, Md Jahirul Islam1,2, Md Obyedul Kalam Azad1, Eun-Ji Go1, Md Hafizur Rahman1, Md Soyel Rana1, Young-Seok Lim1, Jung-Dae Lim1.   

Abstract

This study was carried out to develop a high-performance liquid chromatography method for short-time analysis of the main cannabinoids in the inflorescence of hemp (Cannabis sativa L.). We also performed decarboxylation of the raw material using our advanced analysis technique. In this study, the UV spectrum was considered to analyze each of the four common cannabinoids, solvents, and samples, where the uniform elution of acidic cannabinoids without peak tailing and acids was tested. Optimal results were obtained when readings were taken at a wavelength of 220 nm using water and methanol containing trifluoroacetic acid as mobile phases in a solvent gradient system. The established conditions were further validated by system suitability, linearity, precision, detection limit, and quantitation limit tests. The decarboxylation index (DT50) confirmed that Δ9-THCA decarboxylated faster than CBDA, and both maintained a linear relationship with time and temperature. In addition, the loss of cannabidiol was better prevented during the decarboxylation process in the natural state than in the extracted state.

Entities:  

Keywords:  cannabidiol; cannabinoid; cannabis; chromatography; decarboxylation

Year:  2021        PMID: 34299386     DOI: 10.3390/molecules26144113

Source DB:  PubMed          Journal:  Molecules        ISSN: 1420-3049            Impact factor:   4.411


  3 in total

1.  Impact of Harvest Time and Pruning Technique on Total CBD Concentration and Yield of Medicinal Cannabis.

Authors:  Danilo Crispim Massuela; Jens Hartung; Sebastian Munz; Federico Erpenbach; Simone Graeff-Hönninger
Journal:  Plants (Basel)       Date:  2022-01-05

Review 2.  Cannabinoids-Characteristics and Potential for Use in Food Production.

Authors:  Joanna Kanabus; Marcin Bryła; Marek Roszko; Marta Modrzewska; Adam Pierzgalski
Journal:  Molecules       Date:  2021-11-06       Impact factor: 4.411

3.  Synthesis of a Starchy Photosensitive Material for Additive Manufacturing of Composites Using Digital Light Processing.

Authors:  Sofiane Guessasma; Sofiane Belhabib; Ferhat Benmahiddine; Ameur El Amine Hamami; Sylvie Durand
Journal:  Molecules       Date:  2022-08-23       Impact factor: 4.927

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.